| 基于ADAMS的播种机仿形机构运动仿真 |
| |
| 引用本文： | 白晓虎,张祖立. 基于ADAMS的播种机仿形机构运动仿真[J]. 农机化研究, 2009, 31(3) |
| |
| 作者姓名： | 白晓虎 张祖立 |
| |
| 作者单位： | 沈阳农业大学,工程学院,沈阳,110161 |
| |
| 基金项目： | 辽宁省科技厅开发项目 |
| |
| 摘 要： | 仿形机构是播种机的重要工作机构.为此,介绍了利用ADAMS软件建立平行四连杆仿形机构仿真模型的过程,并对前仿形和后仿形运动情况进行了仿真分析.结果表明,运行结果与理论分析一致,对播种机仿形机构的设计具有指导意义.
|
| 关 键 词： | 仿形机构 运动仿真 播种机 |
Motion Simulation of Profiling Mechanism of a Planter Based on ADAMS |
| |
| Bai Xiaohu,Zhang Zuli. Motion Simulation of Profiling Mechanism of a Planter Based on ADAMS[J]. Journal of Agricultural Mechanization Research, 2009, 31(3) |
| |
| Authors: | Bai Xiaohu Zhang Zuli |
| |
| Affiliation: | College of Engineering;Shenyang Agricultural University;Shenyang 110161;China |
| |
| Abstract: | The profiling mechanism is important in the planter. The process of establishing simulation model of parallel four links profiling mechanism by use of ADAMS software was introduced,and the motion of front profiling and back profiling was simulated.The simulation results are consistent with theoretical analyses and can direct the design of profiling mechanism in planters. |
| |
| Keywords: | ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
