| 热变形对内燃机主轴承润滑特性影响的仿真分析 |
| |
| 引用本文： | 童宝宏,桂长林,陈华,孙军.热变形对内燃机主轴承润滑特性影响的仿真分析[J].农业机械学报,2007,38(6):1-5. |
| |
| 作者姓名： | 童宝宏 桂长林 陈华 孙军 |
| |
| 作者单位： | 1. 合肥工业大学机械与汽车工程学院,230009,合肥市
2. 上海内燃机研究所,200438,上海市 |
| |
| 摘 要： | 阐述了计入热变形影响的内燃机主轴承热流体动力润滑分析方法,分别采用不同边界条件结合实例进行了数值仿真比较分析。仿真结果显示,在所采用的任一边界条件下,计入热变形影响因素后轴心运动轨迹均发生很大变化;并且,平均机油流量和一个载荷周期内机油最大压强比未考虑热变形时均明显增加,而一个载荷周期内的最小油膜厚度则明显减小。
|
| 关 键 词： | 主轴承 热流体动力润滑 热变形 数值仿真 |
| 修稿时间： | 2005-12-29 |
Simulation Analysis of Thermal Deformation Effects on the Lubrication of Main Bearing of ICE |
| |
| Tong Baohong,Gui Changlin,Chen Hua,Sun Jun.Simulation Analysis of Thermal Deformation Effects on the Lubrication of Main Bearing of ICE[J].Transactions of the Chinese Society of Agricultural Machinery,2007,38(6):1-5. |
| |
| Authors: | Tong Baohong Gui Changlin Chen Hua Sun Jun |
| |
| Institution: | 1. Hefei University of Technology 2.Shanghai Internal Combustion Engine Research Institute |
| |
| Abstract: | Considering thermal deformation effects, the method of analyzing thermo-hydrodynamic lubrication of the main bearing was described, and numerical simulation analysis for an example engine was also given under different boundary conditions. Results of simulation showed, with considering thermal deformation effects, the orbit of journal had a large change under any of these conditions. At the same time, the average flow rate and maximum film pressure in one load cycle were increased evidently for the thermal deformation under these boundary conditions, while the minimum film thickness in one load cycle was decreased. |
| |
| Keywords: | Main bearing Thermo-hydrodynamic lubrication Thermal deformation Numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
|
