| 水基胶覆膜机覆膜系统设计 |
| |
| 引用本文： | 沈嵘枫,曾任仁.水基胶覆膜机覆膜系统设计[J].森林工程,2005,21(6):9-10,41. |
| |
| 作者姓名： | 沈嵘枫 曾任仁 |
| |
| 作者单位： | 福建农林大学,福州,350002 |
| |
| 基金项目： | 福建省科学技术厅科学基金资助项目（2002H017）;福建农林大学青年科学基金资助项目（2002020） |
| |
| 摘 要： | 通过对典型的3种涂布方式进行实验，测定其胶层厚度变动系数CD，得出涂布方式对厚度变动系数的影响；覆膜压合质量实验方法采用正交分级实验方法，得出复合压力对疵斑点率的影响，涂布量对疵斑点率的影响．
|
| 关 键 词： | 覆膜 压合 涂布 上胶 |
| 文章编号： | 1001-005X（2005）06-0009-02 |
| 收稿时间： | 2005-05-18 |
| 修稿时间： | 2005-05-18 |
Laminating System Design for Water-based Adhesive Laminator |
| |
| Shen Rongfeng,Zeng Renren.Laminating System Design for Water-based Adhesive Laminator[J].Forest Engineering,2005,21(6):9-10,41. |
| |
| Authors: | Shen Rongfeng Zeng Renren |
| |
| Institution: | Fujian Agriculture and Forestry University, Fuzhou 350002 |
| |
| Abstract: | Through the experiments on three typical coating modes, the variation coefficient CD of glue line thickness was determined and the influence of coating mode on the thickness variation coefficient was concluded, The experimental technique of laminating pressing quality is to adopt orthogonal multistage method, and the influences of laminating pressure and coating quantity on scab point rate variation were drawn in the end. |
| |
| Keywords: | laminating pressure coating sizing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
