|
|||||
|
|
| 基于连续多点成形原理的旋压成形技术 | |
| 引用本文： | 胡志清,李明哲,隋振,关文煜.基于连续多点成形原理的旋压成形技术[J].农业机械学报,2009,40(12):247-250. |
| 作者姓名： | 胡志清 李明哲 隋振 关文煜 |
| 作者单位： | 1. 吉林大学机械科学与工程学院,长春,130025;吉林大学辊锻工艺研究所,长春,130025 2. 吉林大学辊锻工艺研究所,长春,130025 3. 吉林大学通信工程学院,长春,130025 4. 一拖(洛阳)动力机械有限公司,洛阳,471004 |
| 基金项目： | 国家自然科学基金资助项目，国家"863"高技术研究发展计划资助项目，吉林大学"985"工程资助项目和吉林省重大项目 |
| 摘 要： | 介绍了传统的旋压工艺,提出了基于连续多点成形原理的旋压成形工艺,对工作旋轮的布置和驱动方式进行了探讨,研制出高效旋压成形装置,在所研制的旋压成形装置上成形了大量的实验件,实现了圆形板料件的高效旋压成形,为建立新型高效旋压成形的基本理论,解决柔性旋轮结构设计与控制点设置、自动控制系统的控制模式及探索技术参数作必要的准备工作. |
| 关 键 词： | 塑性成形 板材 旋压成形 连续成形 柔性成形 |
Based on Principle of Continuous Multipoint Forming |
|
| Hu Zhiqing,Li Mingzhe,Sui Zhen,Guan Wenyu.Based on Principle of Continuous Multipoint Forming[J].Transactions of the Chinese Society of Agricultural Machinery,2009,40(12):247-250. | |
| Authors: | Hu Zhiqing Li Mingzhe Sui Zhen Guan Wenyu |
| Abstract: | The novel spinning processing based on the continuous multipoint forming was proposed, and the rollers disposal and the drive mode were discussed. Then, the effective spinning set was developed, on which a lot of experimental parts were formed, and the round sheet metal was achieved. Therefore, this study paves the way for building the basic theory of effective spinning, resolving the structure design of flexible roller, the control point setup, and the mode of auto control system, as well probing into technology parameter. |
| Keywords: | Plastic forming Sheet metal Spinning Continuous forming Flexible forming |
| 本文献已被 万方数据 等数据库收录！ | |
| 点击此处可从《农业机械学报》浏览原始摘要信息 | |
| 点击此处可从《农业机械学报》下载免费的PDF全文 | |