| 型孔轮式排种器工作过程与性能仿真 |
| |
| 引用本文： | 于建群,王刚,心男,付宏.型孔轮式排种器工作过程与性能仿真[J].农业机械学报,2011,42(12):83-87,101. |
| |
| 作者姓名： | 于建群 王刚 心男 付宏 |
| |
| 作者单位： | 1. 吉林大学生物与农业工程学院,长春,130025
2. 吉林大学计算机科学与技术学院,长春,130012 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)资助项目(2006AA04Z125)、国家自然科学基金资助项目(50775097、60973090、11172112)和吉林省科技发展计划资助项目(20100313) |
| |
| 摘 要： | 由型孔轮式大豆排种器的三维CAD模型建立了其三维离散元法分析模型,采用球颗粒建立了大豆种子的分析模型,采用离散元法和自主研发的三维CAE软件对排种器的工作过程及性能进行了仿真分析,并与台架试验进行比较.结果表明,排种性能、投种角、种子运动轨迹与台架试验结果基本一致,证明了采用离散元法分析型孔轮式大豆排种器工作过程及其性能的可行性.
|
| 关 键 词： | 型孔轮式排种器 大豆种子 离散元法 优化设计 |
Simulation Analysis of Working Process and Performance of Cell Wheel Metering Device |
| |
| Yu Jianqun
,
Wang Gang
,
Xin Nan
,
Fu Hong.Simulation Analysis of Working Process and Performance of Cell Wheel Metering Device[J].Transactions of the Chinese Society of Agricultural Machinery,2011,42(12):83-87,101. |
| |
| Authors: | Yu Jianqun Wang Gang Xin Nan Fu Hong |
| |
| Institution: | Jilin University;Jilin University;Jilin University;Jilin University |
| |
| Abstract: | A cell wheel metering device and the soybean seed were researched by using the discrete element method.The 3-D discrete element method analytical model of the seed metering device was built on its 3-D CAD model extracted through the method which was based on graphic elements and the surface mesh,and the 3-D particle model of soybean seeds were established on the spherical particle.The metering performance,the trajectories and dropping angles of the soybean seeds were simulated and analyzed by using self-dev... |
| |
| Keywords: | Cell wheel metering device Soybean seeds Discrete element method Optimal design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
|
