| 牧草压捆机设计理论探索和Pro/Engineer仿真 |
| |
| 引用本文： | 赵洪刚,于建国. 牧草压捆机设计理论探索和Pro/Engineer仿真[J]. 农机化研究, 2006, 0(11): 113-116 |
| |
| 作者姓名： | 赵洪刚 于建国 |
| |
| 作者单位： | 1. 东北林业大学,哈尔滨,150040;北华大学,吉林,吉林,132013
2. 东北林业大学,哈尔滨,150040 |
| |
| 基金项目： | 黑龙江省科技厅科技攻关项目 |
| |
| 摘 要： | 根据自行设计的牧草压捆机样机现场试验,对牧草在压缩过程中的变化规律,以及压缩过程对压捆机设计的主要技术指标的影响进行了定性分析。为检查本机的关键装置—牧草喂入机构和压缩机构的运动是否发生干涉,采用了先进的工业设计软件Pro/Engineer对压捆机的设计进行了动态仿真,提高了设计的成功率,增加了农机设计的科技含量。
|
| 关 键 词： | 畜牧学 牧草压捆机 定性分析 农机设计 |
| 文章编号： | 1003-188X（2006）11-0113-04 |
| 收稿时间： | 2006-05-30 |
| 修稿时间： | 2006-05-30 |
Design Theory Research and Pro/Engineer Imitation on Pasture Pressbaler |
| |
| ZHAO Hong-gang,YU Jian-guo. Design Theory Research and Pro/Engineer Imitation on Pasture Pressbaler[J]. Journal of Agricultural Mechanization Research, 2006, 0(11): 113-116 |
| |
| Authors: | ZHAO Hong-gang YU Jian-guo |
| |
| Affiliation: | 1.Northeast Forestry University, Harbin 150040, China, 2.Beihua University, Jilin 132013, China; |
| |
| Abstract: | Pasture variety regularity is analyzed qualitatively and it influences on leading technology target of pressbaler design by means of experiment on pasture pressbaler sample designed by oneself on the spot. In order to check one of its key installations-whether pasture intake mechanism, and compression mechanism happens to intervene or not. This paper imitates press baler design dynamically by adopting advanced Industry design software Pro/Engineer. It improves design success rate and increases scientific content on agriculture-machinery design. |
| |
| Keywords: | Pro/Engineer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
