首页 | 本学科首页   官方微博 | 高级检索  
     检索      

SBR工艺处理合成氨废水的中试研究
引用本文:黄天寅,刘峰,王传琦,周彪,吴玮.SBR工艺处理合成氨废水的中试研究[J].排灌机械,2014(6):517-522.
作者姓名:黄天寅  刘峰  王传琦  周彪  吴玮
作者单位:苏州科技学院环境科学与工程学院,江苏苏州215011
基金项目:江苏省太湖治理科研课题基金资助项目(TH2012201)
摘    要:为了研究合成氨废水的有效处理工艺,以改进后的SBR工艺建立中试系统处理合成氨废水,系统考察了SBR工艺运行的最优参数以及工艺在稳定运行时COD,NH4^+和TN的去除效果.结果表明:SBR工艺的最佳运行工况为进水(1.5h)→好氧曝气(运行时间9 h、曝气量80m~3/h)→缺氧搅拌(3h)→沉淀(50min)→出水(1.5h),SBR工艺对COD,NH4^+-N和TN的平均去除率分别为91%,87%和83%,去除效果显著,出水COD,NH4^+-N和TN均达到GB 13458—2001《合成氨工业水污染物排放标准》的一级标准.

关 键 词:合成氨废水  生物脱氮技术  去除率  SBR工艺  中试

Pilot scale SBR process for removal of synthetic ammonium wastewater
Huang Tianyin,Liu Feng,Wang Chuanqi,Zhou Biao,Wu Wei.Pilot scale SBR process for removal of synthetic ammonium wastewater[J].Drainage and Irrigation Machinery,2014(6):517-522.
Authors:Huang Tianyin  Liu Feng  Wang Chuanqi  Zhou Biao  Wu Wei
Institution:(School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou, Jiangsu 215011, China)
Abstract:Based on the traditional SBR,a new pilot SBR system was established for the treatment of a high-strength ammonia nitrogen wastewater in order to research the effective treatment process.The effects of the nitrogen removal were emphatically studied.The results show that the optimum operating parameters gained is as follow;the inflow time is 1.5 h,the aeration time is 9 h,the aeration rate is80 m^3 /h,the anaerobic stir time is 3 h,sedimentation time is 50 min,and the effluent time is 1.5 h.The SBR effluent meets the demands of the first class standard for synthetic ammonia industry wastewater of GB 13458—2001 "Integrated Wastewater Discharge Standard" when the removal rates of COD,NH4^+-N and TN were equal to 91%,87%and 83%,respectively.
Keywords:synthetic ammonia wastewater  biological nitrogen removal  removal rate  SBR process  pilot scale
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号