首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于压差式施肥罐的均匀施肥方法
引用本文:胡昕宇,严海军,陈鑫.基于压差式施肥罐的均匀施肥方法[J].农业工程学报,2020,36(1):119-127.
作者姓名:胡昕宇  严海军  陈鑫
作者单位:中国农业大学水利与土木工程学院,北京 100083;中国农业大学北京市供水管网系统安全与节能工程技术研究中心,北京 100083
基金项目:国家重点研发计划项目(2017YFD0201502);国家自然科学基金资助项目(51836010、41961144014)
摘    要:压差式施肥罐是水肥一体化中应用较为广泛的施肥装置,但它容易产生施肥不均匀的问题,会因局部过量施肥造成土壤污染,还会影响作物的产量和品质。为利用计算机控制压差式施肥罐进行田间作物的恒定浓度和流量施肥,该文基于肥料连续方程推导了解析解,由计算机控制流入施肥罐的流量和直接流过主管道进入灌溉系统的流量。在此基础上,该文通过试验数据验证了施肥罐内水肥流动数学模型,对解析解控制压差式施肥罐的恒定浓度和流量施肥进行了模拟,模拟结果与解析解的相对偏差小于15%,验证了该均匀施肥方法的合理性。结果表明以最优肥液浓度的±50%为界,传统压差式施肥罐使用过程中约有70%~80%的肥料处于过量施肥或不充分施肥范围内,通过均匀施肥方法,可以基本实现灌溉过程中基于压差式施肥罐的施肥均匀。

关 键 词:肥料  模型  压力  水肥一体化  压差式施肥罐  均匀施肥  解析解
收稿时间:2019/7/30 0:00:00
修稿时间:2019/9/10 0:00:00

Uniform fertilization method based on differential pressure tank
Hu Xinyu,Yan Haijun and Chen Xin.Uniform fertilization method based on differential pressure tank[J].Transactions of the Chinese Society of Agricultural Engineering,2020,36(1):119-127.
Authors:Hu Xinyu  Yan Haijun and Chen Xin
Institution:1. College of Water Resources and Civil Engineering, China Agricultural University, Beijing 100083, China; 2. Beijing Engineering Research Center of Safety and Energy Saving Technology for Water Supply Network System, China Agricultural University, Beijing 100083, China,1. College of Water Resources and Civil Engineering, China Agricultural University, Beijing 100083, China; 2. Beijing Engineering Research Center of Safety and Energy Saving Technology for Water Supply Network System, China Agricultural University, Beijing 100083, China and 1. College of Water Resources and Civil Engineering, China Agricultural University, Beijing 100083, China; 2. Beijing Engineering Research Center of Safety and Energy Saving Technology for Water Supply Network System, China Agricultural University, Beijing 100083, China
Abstract:Differential pressure tank is a widely used fertilization device in the application of fertilization in China and many other countries. However, the fertilizer concentration in the tank continuously decays with the inflow of water. The decay feature of fertilizer concentration can easily lead to excessive fertilization at the head and insufficient fertilization at the end of the irrigation system. An analytical solution was proposed in this paper to achieve uniform fertilization based on differential pressure tank with constant fertilizer concentration and flux. The relationship between the uniform fertilization analytical solution and the fertilizer continuity equation was obtained based on differential pressure tank. The analytical solution was expected to control the flux flowing into the differential pressure tank and the flux directly flowing into the irrigation system through the main pipe according to 4 parameters: Uniform fertilizer concentration, initial fertilizer concentration, the volume of differential pressure tank and the total fertilization flux of the main pipe. Based on the analytical solution, the fertilizer continuity equation and the incompressible continuity and momentum equations of water were used for describing the movement of mixture in the differential pressure tank. The numerical model for mixed water and fertilizer flow in the differential pressure tank was determined by experimental data. The fertilizer concentration simulated by numerical model was nearly uniform in the tank and the fertilizer concentration at tank outlet obtained by numerical model decayed with a negative exponential pattern as described by Feng''s theory. The numerical simulation results directly verified the accuracy of the basis of Feng''s theory. The differential equation was also the basis of the uniform fertilization. The mean absolute error between the differential equation and the experimental data was less than 0.041 when the boundary condition of traditional fertilization method was substituted into the differential equation, which indirectly proved the rationality of uniform fertilization method satisfying the boundary conditions of constant fertilizer concentration and flux. The analytical solution''s feasibility in the uniform fertilization process based on differential pressure tank was simulated by the numerical model of fertilizer solution in determining the uniform fertilizer concentration and the fertilization time. The fertilizer concentration at tank outlet simulated by the numerical model decayed almost linearly and agreed with the uniform fertilization analytical solution. The fertilizer concentration simulated by the numerical model at drip irrigation system inlet was almost uniform and in agreement with the analytical solution of uniform fertilization. The relative bias of fertilizer concentration between the analytical solution and computation calculated by the numerical model was less than 15%, which verified the feasibility of uniform fertilization method based on differential pressure tank. The results showed that the application of uniform fertilization method and the uniform fertilization method could basically achieve constant fertilizer concentration and flux based on differential pressure tank. According to the actual product, the relationship between valve opening and time could be obtained in order to realize the control of valve opening process by computer. Approximately 70% to 80% of fertilizer in the normal operation was within range of the excessive or insufficient amount, whereas the uniform fertilization method could effectively avoid the waste of excessive fertilization and the lack of insufficient fertilization.
Keywords:fertilizers  models  pressure  differential pressure tank  uniform fertilization  analytical solution
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《农业工程学报》浏览原始摘要信息
点击此处可从《农业工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号