| 响应面优化马尾松化学浆帚化技术 |
| |
| 引用本文： | 周建波,;谢拥群,;陈汀杰,;傅万四.响应面优化马尾松化学浆帚化技术[J].林业机械与木工设备,2014(8):22-26. |
| |
| 作者姓名： | 周建波 ;谢拥群 ;陈汀杰 ;傅万四 |
| |
| 作者单位： | [1]中国林业科学研究院林业新技术研究所,北京100091; [2]国家林业局北京林业机械研究所,北京100029; [3]福建农林大学材料科学与工程学院,福建福州350002 |
| |
| 基金项目： | 中央级公益性科研院所基本科研业务费专项基金项目“阻燃型保温材料用植物纤维帚化技术与设备研究”（CAFINT2011C07）;福建省产学合作科技重大项目（2013H6004） |
| |
| 摘 要： | 以马尾松化学浆打浆度为响应值，应用Box-Behnken Design（响应面优化）对磨浆次数、磨浆浓度和盘磨间隙3个因素进行响应面分析，确定了磨浆的最佳工艺条件为：盘磨间隙30 um、磨浆次数2次、磨浆浓度8%。在此条件下，马尾松的打浆度可以达到45.2＆#176;SR，与预测值吻合。
|
| 关 键 词： | 马尾松 打浆度 响应面法 磨浆 |
Technology for Response Surface Optimizing Pinus Massoniana Chemical Pulp Fibrillation |
| |
| Institution: | ZHOU Jian-bo, XIE Yong-qun, CHEN Ding-jie, FU Wan-si (1. Forestry New Technology Research Institute, Chinese Academy of Eorestry, Beijing 100091, China; 2.Beijing Forestry Machinery Research Institute of the State Forestry Administration, Beijing 100029, China; 3.College of Materials Science and Engineering, Fujian Agriculture and Forestry University, Fuzhou Fujian 350002, China) |
| |
| Abstract: | With the pinus massoniana chemical pulp beating degree as a response value, Box-Behnken Design （BBD） is used to conduct response surface analysis of three factors,the number of pulping, pulping concentration, pulping clearance, with the optimum conditions of beating degree determined as follows：pulping clearance, 3 μm; number of pulping, 2;pulping concentration, 8%. Under this condition, the beating degree of pinus massoniana can reach 45.2＆#176;SR, matching the predicted value. |
| |
| Keywords: | pinus massoniana degree of beating response surface methodology pulping |
| 本文献已被 维普 等数据库收录！ |
|
