Abstract: | Substrates made from rockwool, coir dust, pumice and perlite were compared for conduciveness to Pythium root and crown rot in cucumber under near-commercial conditions. Rockwool slabs of 7 cm height were more conducive to the Pythium disease than coir dust slabs, pumice or perlite under these conditions. Temperature, oxygen concentration and water content were determined in the substrates to explain differences in conduciveness between the inorganic substrates rockwool, pumice and perlite by differences in the physical conditions. Temperature and oxygen concentration could not explain the differences but the higher disease level on rockwool was associated with a much higher water content of this substrate as compared to coir dust, pumice and perlite. Increasing the height of the substrate from 7 to 14 cm greatly decreased the percentage of diseased plants due to the Pythium disease on rockwool but had no effect on the level of disease on perlite when the substrate had been infested 4 cm below the planting hole. This difference in response in substrate height between rockwool and perlite could be explained by a much larger decrease in water content with substrate height in the rockwool than in the perlite substrate. Temperature in the substrates were above 30 °C for more than 6 h on sunny days in June and reached maximum values of 35 °C or more. These temperatures are highly favourable for the pathogen P. aphanidermatum but will have adverse effects on most biocontrol strains. |