| 基于EPS模块墙体灌注充模过程的分析与研究 |
| |
| 引用本文： | 张亮.基于EPS模块墙体灌注充模过程的分析与研究[J].湖南农机,2013(6):305-305,307. |
| |
| 作者姓名： | 张亮 |
| |
| 作者单位： | 东北林业大学,黑龙江哈尔滨150040 |
| |
| 摘 要： | 文章基于EPS模块墙体灌注过程中充模过程的研究,得到了充模过程可以分为三个阶段,并结合三个阶段的运动规律分析了每阶段形成的原因,为灌注充模设备和工艺的改进提供理论基础.。
|
| 关 键 词： | EPS模块 灌注 充模 |
EPS based module wall perfusion filling process analysis and research |
| |
| ZHANG Liang.EPS based module wall perfusion filling process analysis and research[J].Hunnan Agricultural Machinery,2013(6):305-305,307. |
| |
| Authors: | ZHANG Liang |
| |
| Institution: | ZHANG Liang (Northeast Forestry University,Harbin, Heilongjiang 150040,China) |
| |
| Abstract: | Article is based on EPS module wall during perfusion of the filling process,got the filling process can be divided into three stages . Combined with the movement of the three stages of analysis of the reasons for the formation of each stage, as perfusion filling equipment and process improvements provide a theoretical basis. |
| |
| Keywords: | EPS module Perfusion Mold filling |
| 本文献已被 维普 等数据库收录！ |
|
