| 明胶改性脲醛树脂 |
| |
| 引用本文： | 李智,杜官本,冉鑫,杨红星,周晓剑,杨龙.明胶改性脲醛树脂[J].西北林学院学报,2023,38(1):218-223. |
| |
| 作者姓名： | 李智 杜官本 冉鑫 杨红星 周晓剑 杨龙 |
| |
| 作者单位： | （西南林业大学 云南省木材胶黏剂及胶合制品重点实验室/国家生物质材料国际联合研究中心，云南 昆明 650224） |
| |
| 基金项目： | 国家自然科学基金(32060323,32071688)；;云南省基础研究计划-优秀青年项目(202001AW070017)；;云南省中青年学术和技术带头人后备人才项目(202105AC160048)； |
| |
| 摘 要： | 脲醛树脂是目前工业生产中最主要且无可替代的人造板胶黏剂，改善其胶合强度和甲醛释放量一直是研究热点。本研究以传统的“碱-酸-碱”工艺合成脲醛树脂，在合成过程的酸性阶段和冷却出料阶段分别加入明胶，对脲醛树脂进行改性。通过红外光谱、核磁共振碳谱、差式扫描量热仪等对树脂的结构和固化性能进行分析，并对胶黏剂改性前后的胶合性能、黏度、固化时间等进行测试。结果表明，不同阶段改性后的UF树脂固化温度降低、固化时间缩短，黏度和胶合强度均增加，甲醛释放量降至1.39 mg·L-1,达到GB/T 18580-2001中要求的E1级。
|
| 关 键 词： | 脲醛树脂 明胶改性 甲醛释放量 胶合性能 |
Preparation of Gelatin Modified Urea-Formaldehyde Resin |
| |
| LI Zhi,DU Guan-ben,RAN Xin,YANG Hong-xing,ZHOU Xiao-jian,YANG Long. Preparation of Gelatin Modified Urea-Formaldehyde Resin[J].Journal of Northwest Forestry University,2023,38(1):218-223. |
| |
| Authors: | LI Zhi DU Guan-ben RAN Xin YANG Hong-xing ZHOU Xiao-jian YANG Long |
| |
| Institution: | (Southwest Forestry University,Yunnan Key Laboratory of Wood Adhesives and Adhesives Products/National Joint International Research Center for Biomass Materials,Kunming 650224,Yunnan,China) |
| |
| Abstract: | Urea formaldehyde resin is the most important and irreplaceable wood-based panel adhesive in industrial production.Improving its bonding strength and formaldehyde emission has always been a research hotspot.In this paper,urea formaldehyde resin was synthesized by the traditional "alkali-acid-alkali" process.Gelatin was added in the acid stage and cooling discharge stage of the synthesis process to modify the urea formaldehyde resin.The structure and curing properties of the resin were analyzed by FT-IR,13C NMR,and differential scanning calorimetry.The bonding properties,viscosity and curing time before and after modification were tested.The results showed that the curing temperature and curing time of the modified UF resin decreased,the viscosity and bonding strength increased,and the formaldehyde emission decreased to 1.39 mg/L,reaching the E1 level required in China national standard (GB/T 18580-2001). |
| |
| Keywords: | urea-formaldehyde resin gelatin modified formaldehyde emission bonding strength |
|
| 点击此处可从《西北林学院学报》浏览原始摘要信息 |
| 点击此处可从《西北林学院学报》下载免费的PDF全文 |
|
