| 切削方向对木材切削力的影响 |
| |
| 引用本文： | 张占宽,彭晓瑞,李伟光,曾娟,王宝刚.切削方向对木材切削力的影响[J].木材工业,2011,25(6):7-9. |
| |
| 作者姓名： | 张占宽 彭晓瑞 李伟光 曾娟 王宝刚 |
| |
| 作者单位： | 中国林科院木材工业研究所;国家林业局木材科学与技术重点实验室,北京100091 |
| |
| 基金项目： | 林业公益性行业科研专项经费项目(201004006) |
| |
| 摘 要： | 以杉木、樟子松、水曲柳等三种木材为试验对象,采用闭式切削方式,研究切削方向对木材主切削力的影响.结果表明:不同切削方向时,木材主切削力大小具有明显的各向异性,主要趋势为端向主切削力最大,横向最小.相同切削方向时,水曲柳主切削力最大,杉木最小；木材不同截面的主切削力呈现规律性变化,但3种木材间的差异较大.
|
| 关 键 词： | 切削方向 木材 切削力 |
Influence of Cutting Direction on Cutting Forces in Wood |
| |
| ZHANG Zhan-kuan,PENG Xiao-rui,LI Wei-guang,ZENG Juan,WANG Bao-gang.Influence of Cutting Direction on Cutting Forces in Wood[J].China Wood Industry,2011,25(6):7-9. |
| |
| Authors: | ZHANG Zhan-kuan PENG Xiao-rui LI Wei-guang ZENG Juan WANG Bao-gang |
| |
| Institution: | ZHANG Zhan-kuan,PENG Xiao-rui,LI Wei-guang,ZENG Juan,WANG Bao-gang (Research Institute of Wood Industry,Chinese Academy of Forestry,Key Laboratory of Wood Science and Technology of State Forestry Administration,Beijing100091,China) |
| |
| Abstract: | Samples of China fir,Mongolian pine and Manchurian ash were used in this study to examine the influence of different cutting directions on cutting forces.The results showed that the cutting force was dependent upon wood grain direction.It was also observed that the cutting force reached the highest during cross cutting,while the cutting force during longitudinal cutting was higher than the force during transverse cutting.For the same cutting pattern,the cutting force on Manchurian ash samples was the highes... |
| |
| Keywords: | cutting direction wood cutting force |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
