Development and variation of wood density, kraft pulp yield and fibre dimensions in young Norway spruce (Picea abies)

Important wood, pulp and fibre properties were investigated on small wood samples from two Rumanian, one German and one Norwegian provenance of Norway spruce (Picea abies) grown in Sørkedalen, Norway. Several samples were collected from inside each single tree, both in radial and transversal direction in the stem. Data were collected from a total of 59 trees, each 28 years of age. All investigated properties showed close relationship to ring number (RN) (cambium age). For basic density and fibre wall thickness (FWT), a fast decline was first observed when moving from pith to bark and a minimum value was found around RN 5–8. The declining trend was then followed by an increase. Kraft pulp yield, fibre length and fibre width (FW) also increased with RN, but the increase was most pronounced close to the pith. The pulp yield (PY) more or less stabilised outside of RN 5–6. FW showed a decrease outside of RN 10–12, but this was probably due to the remarkable simultaneous drop in ring width for the investigated trees. FW decreased, while basic density and fibre length increased with increasing height in the tree. PY and FWT were not affected by height in tree. Diameter at breast height (DBH) was the most important variable indicating differences between trees in the investigated material. Basic density, fibre length and FWT decreased, while FW increased with increasing DBH. Height to crown had a positive effect on basic density, but had no influence on any of the remaining properties. Differences between provenances were found for basic density, fibre length and FW. The analyses showed that it is possible to describe the variation inside and between trees satisfactorily for a range of important wood and fibre properties.