| Abstract: | Although the composition of the soil solution has important ecological information, there is no general consensus for obtaining and analyzing of the soil solution. This study presents an alternative procedure to obtain the soil solution and determine all relevant anions and cations. The soil samples are taken with an auger. 10—20 g of field moist soil are desorbed in a pressure chamber at 170 kPa (pF 3.2), with a cellulose acetate membrane filter (∅︁ < 0.45 μm) as capillar bridge between the interior and exterior of the chamber. The desorption procedure is performed at 4°C for 24 hours and yields up to 1.0 ml soil solution, depending on the actual water potential. If more soil solution is needed, the soil may be replaced by another aliquot of the same sample. 0.15 ml of soil solution is sufficient for analysing all cations and anions, which account quantitatively for the ion balance with a capillary electrophoresis. Compared with suction cups, ion concentrations in desorption solutions are, although generally lower, in the same order of magnitude. The advantage of this method is that no field equipment is needed, apart from the auger. Even in heterogeneous forest soils, water soluble ions can be monitored with a high spatial resolution and without any dilution effects, which are common in the most laboratory methods. The problem of lacking spatial representativity in stationary lysimeter stations is also overcome. Additionally it is possible to obtain and analyze soil solutions in a suction range where suction cups fail. |
