|
|||||
|
|
| 干壳莲子剥壳机及刀具参数研究 | |
| 引用本文： | 赵小广,黄东杰,宗力,周海美. 干壳莲子剥壳机及刀具参数研究[J]. 农机化研究, 2007, 0(9): 153-157 |
| 作者姓名： | 赵小广 黄东杰 宗力 周海美 |
| 作者单位： | 1. 东风柳州汽车有限公司,技术中心,广西,柳州,545005 2. 华中农业大学,工程技术学院,武汉,430070 3. 湖南对外建设有限公司,长沙,410011 |
| 摘 要： | 根据干壳莲子加工的现状,设计了莲子脱壳机,介绍了整机的主要结构特点;以提高剥净率,降低破碎率为目的,采用正交试验方法,对剥壳刀具的参数进行了试验研究.同时,探讨了剥壳刀具刀齿的刃角 ,齿间距 ,剥壳力对剥净率、破碎率的影响.通过数据分析,得到较优参数组合. |
| 关 键 词： | 农业工程 剥壳机 试验 干壳莲子 参数 刀具 干壳莲子 剥壳机 刀具 参数研究 Peeling Lotus Seed Parameters Machine 参数组合 数据分析 影响 间距 刀齿 正交试验方法 破碎率 剥净率 结构特点 脱壳机 设计 现状 |
| 文章编号： | 1003-188X（2007）09-0153-05 |
| 收稿时间： | 2006-12-19 |
| 修稿时间： | 2006-12-19 |
Research on Machine and Cuter Parameters of Dry Lotus Seed Peeling |
|
| ZHAO Xiao-guang,HUANG Dong-jie,ZONG Li,ZHOU Hai-mei. Research on Machine and Cuter Parameters of Dry Lotus Seed Peeling[J]. Journal of Agricultural Mechanization Research, 2007, 0(9): 153-157 | |
| Authors: | ZHAO Xiao-guang HUANG Dong-jie ZONG Li ZHOU Hai-mei |
| Affiliation: | 1.Dongfeng Liuzhou Automobile CO.,LTD., Liuzhou 545005, China; 2.College of Engineering Technology, Huazhong Agricultural University, Wuhan 430070, China; 3.Hunan Foreign Construction CO.LTD, Changsha 410011, China |
| Abstract: | In this paper, in accordance with the status of dry lotus seed processing, a machine was designed for in order to raise the rate hulling and reduce the crushing rate, a machine of the dried lotus seed peeling testing furniture developed by myself was use as experimental model A was carry out to study different parameters of the cutter. The effects of knife-edge clearance, knife-edge angle and force on the rate hulling and crushing was investigated By means of tests of between subjects effects, the preferable combination among three factors was gained. |
| Keywords: | agricultural engineering hulling experiment dry lotus seed parameters cutter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |