| 伞齿轮断齿现象的工艺分析 |
| |
| 引用本文： | 倪志华,郁超,马久,隋向军.伞齿轮断齿现象的工艺分析[J].内蒙古农业大学学报(自然科学版),2006,27(3):80-82. |
| |
| 作者姓名： | 倪志华 郁超 马久 隋向军 |
| |
| 作者单位： | 1. 内蒙古农业大学机电工程学院,呼和浩特,010018
2. 河北晶牛集团,邢台,054000 |
| |
| 摘 要： | 伞齿轮在使用过程中常有断齿现象发生。本文针对这种现象，对用40Cr钢为原材料制作的伞齿轮，从使用材料和热处理工艺等方面，进行了热处理试验、性能试验、组织检验等分析研究，找出了断齿原因，提出了有效的热处理方案，从而可控制伞齿轮的断齿现象，提高伞齿轮的使用性能。
|
| 关 键 词： | 伞齿轮 断齿 分析与控制 |
| 文章编号： | 1009-3575(2006)03-0080-03 |
| 收稿时间： | 2006-07-20 |
| 修稿时间： | 2006年7月20日 |
ANALYSIS OF TOOTH BROKBN CAUSB OF BEVBL GEAR AND ITS CONTROL |
| |
| NI ZhI-hua,Yu Chao,Ma jiu,Sui xiang-jun.ANALYSIS OF TOOTH BROKBN CAUSB OF BEVBL GEAR AND ITS CONTROL[J].Journal of Inner Mongolia Agricultural University(Natural Science Edition),2006,27(3):80-82. |
| |
| Authors: | NI ZhI-hua Yu Chao Ma jiu Sui xiang-jun |
| |
| Institution: | 1. College of Mechanical and Electrical Engineering ,Inner Mongolia Agriculture University ,Huhhot 010018, China; 2. Hebei Jingniu Group ,XingTai 054000,China |
| |
| Abstract: | Bevel gear tooth broken happens frequently in practical using. This phenomenon was analyzed by means of heat treatment test, performance test and steel structure examination on bevel gear made of 40Cr steel. The cause for tooth broken was found. Based on the result of the study, an effective heat treating plan was recommended in order to improve the performance of bevel gear. |
| |
| Keywords: | Bevel gear tooth breaking analysis and control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
