| S1100型柴油机气缸体强度及优化分析 |
| |
| 引用本文： | 郝志勇,陈达亮. S1100型柴油机气缸体强度及优化分析[J]. 农业机械学报, 2005, 36(9): 28-31 |
| |
| 作者姓名： | 郝志勇 陈达亮 |
| |
| 作者单位： | 浙江大学机械与能源工程学院;天津大学机械工程学院 |
| |
| 摘 要： | 以轻量化为目标，对S1100型柴油机气缸体强度进行有限元计算分析。运用参数化特征建模技术建立了气缸体优化设计前后的三维几何模型。以MSC／NASTRAN为有限元分析平台，建立气缸体三维有限元分析模型。利用模态试验技术获得了该气缸体的固有频率并和计算获得的固有频率进行比较，从而验证气缸体有限元模型。通过计算获得气缸体整体应力及位移的分布图，并在此基础上对该气缸体进行轻量化设计，减少3．3kg。优化设计后的气缸体通过计算获知其应力分布更趋均匀合理。
|
| 关 键 词： | 柴油机 气缸 强度 有限元法 |
| 收稿时间： | 2004-02-06 |
| 修稿时间： | 2004-02-06 |
Structural Strength Analysis and Lightweight Design of S1100 Diesel Engine Block |
| |
| Hao Zhiyong,Chen Daliang. Structural Strength Analysis and Lightweight Design of S1100 Diesel Engine Block[J]. Transactions of the Chinese Society for Agricultural Machinery, 2005, 36(9): 28-31 |
| |
| Authors: | Hao Zhiyong Chen Daliang |
| |
| Affiliation: | 1.Zhejiang University 2.Tianjin University |
| |
| Abstract: | The structural strength of a S1100 type of diesel engine block was analyzed in this paper. A complex 3-D geometric model of the cylinder block was established by using the parametrized modeling technology, and then a 3-D finite element model of the block was constructed. The natural frequencies of the block were calculated by the MSC/NASTRAN software. The finite element model was validated by comparison of the simulated data with those from the measurements. Based on the stress results from the simulation, the stress distribution on the cylinder block was obtained and the weight of a redesigned engine block based on the stress distribution had a reduction of 3.3 kg. |
| |
| Keywords: | Diesel engine Cylinder Strength Finite element methods |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
