| 弧齿锥齿轮数控展成及直接插补算法 |
| |
| 引用本文： | 刘凯,赵东标. 弧齿锥齿轮数控展成及直接插补算法[J]. 勤云标准版测试, 2007, 0(3): 257-264 |
| |
| 作者姓名： | 刘凯 赵东标 |
| |
| 作者单位： | 南京航空航天大学机电学院,中国南京210016 |
| |
| 基金项目： | 江苏省自然科学基金 , 江苏省科技厅科技攻关项目 |
| |
| 摘 要： | 分析了弧齿锥齿轮数控加工中产形轮和工件齿轮之间的展成运动,建立了弧齿锥齿轮齿面的数学模型.提出了弧齿锥齿轮数控加工的直接插补算法,确定了铣齿刀盘中心运动和工件齿轮旋转运动之间的关系.将该算法应用于自主研制的弧齿锥齿轮数控铣齿机中,实现了对弧齿锥齿轮的切齿加工.最后通过实例对该数学模型和插补算法进行了说明和验证.
|
| 关 键 词： | 弧齿锥齿轮 数学模型 展成运动 直接插补 spiral bevel gear mathematical model generating motion direct interpolation 弧齿锥齿轮 数控展成 插补算法 NC MACHINING SPIRAL BEVEL GEAR DIRECT INTERPOLATION MOTION GENERATION example verify control cutting machine relationship center rotation direct interpolation algorithm mathematical model tooth |
| 修稿时间： | 2006-09-20 |
ALGORITHMS OF GENERATION MOTION AND DIRECT INTERPOLATION FOR SPIRAL BEVEL GEAR NC MACHINING |
| |
| Liu Kai,Zhao Dongbiao. ALGORITHMS OF GENERATION MOTION AND DIRECT INTERPOLATION FOR SPIRAL BEVEL GEAR NC MACHINING[J]. , 2007, 0(3): 257-264 |
| |
| Authors: | Liu Kai Zhao Dongbiao |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, NUAA, 29 Yudao Street, Nanjing, 210016, P. R. China |
| |
| Abstract: | The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear. The interpolation algorithm is implemented to control the gear cutting on self-developed spiral bevel gear NC cutting machine. An example is given to verify the mathematical model and the interpolation algorithm. |
| |
| Keywords: | spiral bevel gear mathematical model generating motion direct interpolation |
|
| 点击此处可从《勤云标准版测试》浏览原始摘要信息 |
|
点击此处可从《勤云标准版测试》下载全文 |
|
