| 薄壁零件的高速铣削振动研究 |
| |
| 引用本文： | 汪通悦,何宁,李亮. 薄壁零件的高速铣削振动研究[J]. 勤云标准版测试, 2007, 0(2): 112-117 |
| |
| 作者姓名： | 汪通悦 何宁 李亮 |
| |
| 作者单位： | [1]南京航空航天大学机电学院,中国南京210016 [2]淮阴工学院数字化制造技术实验室,中国淮安223001 |
| |
| 基金项目： | 国家自然科学基金 , 江苏省自然科学基金 , 江苏省高校自然科学基础研究计划项目 , 淮安市工业发展基金 |
| |
| 摘 要： | 为研究薄壁零件加工的振动机理,本文在考虑动态切削厚度的变化以及顺铣和逆铣之间差别的基础上,建立了一个薄壁零件立铣的力学模型,并用两个铣削实例加以验证.结果表明,该模型可以预测动态铣削过程中的切削力和振动位移.
|
| 关 键 词： | 薄壁零件 振动 力学模型 切削参数 thin-walled component vibration mechanistic model cutting parameter 零件 高速铣削 振动研究 COMPONENTS MILLING Experimental results show predict force simultaneously process end milling experiments verify dynamic model flexible structures based variations |
| 收稿时间： | 2006-06-27 |
| 修稿时间： | 2006-10-23 |
VIBRATION IN HIGH-SPEED MILLING OF THIN-WALLED COMPONENTS |
| |
| Wang Tongyue,He Ning,Li Liang. VIBRATION IN HIGH-SPEED MILLING OF THIN-WALLED COMPONENTS[J]. , 2007, 0(2): 112-117 |
| |
| Authors: | Wang Tongyue He Ning Li Liang |
| |
| Affiliation: | 1. College of Mechanical and Electrical Engineering, NUAA, 29 Yudao Street, Nanjing, 210016, P. R. China~ 2. Digital Manufacturing Technology Lab, Huaiyin Institute of Technology, Huait an, 223001, P. R. China |
| |
| Abstract: | To investigate the vibration principle in machining thin-walled components, a dynamic model for end milling of flexible structures is built based on considering the variations in the dynamic chip thickness and the differences between up-milling and down-milling. Two milling experiments verify the model. Experimental results show that the model can predict the milling force and displacements simultaneously in the dynamic milling process. |
| |
| Keywords: | thin-walled component vibration mechanistic model cutting parameter |
|
| 点击此处可从《勤云标准版测试》浏览原始摘要信息 |
|
点击此处可从《勤云标准版测试》下载全文 |
|
