Irrigation of Lucerne under semi-arid conditions in Cyprus

Summary Three amounts of water –1.0, 0.8 and 0.6 of the irrigation requirement — were used to irrigate lucerne at two frequencies of application — once or twice during each growth cycle. Screened Class A pan evaporation, adjusted by monthly crop coefficients, proved a dependable guide for irrigation. Irrigating once per growth cycle was sufficient, and the highest yield was obtained when the full irrigation requirement was applied. The average annual dry matter yield for the three amounts of irrigation water — 1390, 1110 and 829 mm per year — was 20 285, 16 353 and 12 952 kg ha^–1 respectively, i. e., yield decreased linearly with decreasing amount of water applied. As the water used was saline — with an electrical conductivity of 3 mmhos/cm^–1 — the main root zone became gradually salinized with the drier treatments, while with the wettest treatment salts accumulated below 80 cm depth. Yields were drastically reduced during the hot summer months, even when adequate water was available in the soil profile. This combined with the high irrigation requirement resulted in very low efficiency of irrigation during summer.