| 汽车变速器齿轮修形仿真分析 |
| |
| 引用本文： | 吴晗,胡金鹏,冯超超. 汽车变速器齿轮修形仿真分析[J]. 农业装备与车辆工程, 2020, 58(2): 93-98 |
| |
| 作者姓名： | 吴晗 胡金鹏 冯超超 |
| |
| 作者单位： | 200093 上海市 上海理工大学机械工程学院;200093 上海市 上海理工大学机械工程学院;200093 上海市 上海理工大学机械工程学院 |
| |
| 摘 要： | 汽车变速器的关键部件齿轮因其加工和装配质量的影响,工作时容易引起振动噪声大及承载能力降低等问题,而齿轮修形是解决这些问题的有效方法,且成本较低。针对某款汽车变速器,利用Romax对齿轮进行修形分析。结果表明,修形后减小了齿轮的传动误差和最大接触应力,齿面载荷分布更加合理。有效改善了齿轮的传动性能,增加了齿轮寿命。
|
| 关 键 词： | 汽车变速器 多工况 齿轮修形 Romax 传动误差 载荷分布 |
Simulation Analysis of Gear Modification of Automobile Transmission |
| |
| Wu Han,Hu Jinpeng,Feng Chaochao. Simulation Analysis of Gear Modification of Automobile Transmission[J]. Agricultural Equipment & Vehicle Engineering, 2020, 58(2): 93-98 |
| |
| Authors: | Wu Han Hu Jinpeng Feng Chaochao |
| |
| Affiliation: | (School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China) |
| |
| Abstract: | The key component of automobile transmission is gear.Because of the influence of gear processing and assembly quality,it is easy to cause problems such as high vibration and noise and low load-carrying capacity when it works.Gear modification is an effective way to solve these problems,and its cost is low.In this paper,Romax is used to analyze the gear modification of a certain type of automobile transmission.The results show that the transmission error and the maximum contact stress of the gear are reduced after modification,and the load distribution on the tooth surface is more reasonable.It effectively improves the transmission performance of gears and increases the service life of gears. |
| |
| Keywords: | automobile transmission multiple working conditions tooth profile modification Romax transmission error load distribution |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
