| 机械压力机双电机驱动传动系统研究 |
| |
| 引用本文： | 何予鹏,陈合顺,娄伟,赵升吨.机械压力机双电机驱动传动系统研究[J].河南农业大学学报,2007,41(5):588-590. |
| |
| 作者姓名： | 何予鹏 陈合顺 娄伟 赵升吨 |
| |
| 作者单位： | 1. 河南农业大学机电工程学院,河南,郑州,450002
2. 西安交通大学机械工程学院,陕西,西安,710049 |
| |
| 摘 要： | 针对目前机械压力机存在着由于锻冲速度过高而产生的振动大,噪声大,模具寿命短等缺点,设计了一种双电机驱动的机械压力机传动系统.该传动系统主要由差动轮系、行星轮系和2个普通电机组成,通过控制2个电机的运转和停止,使得机械压力机滑块得到2种不同的工作速度.从而既保证了滑块的工作效率,又大大降低了滑块锻冲时的工作速度.以JH23-200型机械压力机的技术参数为依据,设计出了满足机械压力机工作要求的双电机驱动传动系统,从而证明了该传动方案是切实可行的.
|
| 关 键 词： | 机械压力机 差动轮系 传动系统 |
| 文章编号： | 1000-2340（2007）05-0588-03 |
| 收稿时间： | 2007-03-05 |
| 修稿时间： | 2007年3月5日 |
Study on Transmission System of Mechanical Press Driven by Two Motors |
| |
| HE Yu-peng,CHEN He-shun,LOU Wei,ZHAO Sheng-dun.Study on Transmission System of Mechanical Press Driven by Two Motors[J].Journal of Henan Agricultural University,2007,41(5):588-590. |
| |
| Authors: | HE Yu-peng CHEN He-shun LOU Wei ZHAO Sheng-dun |
| |
| Abstract: | A new type of transmission system of mechanical press is designed according to the demands of low-speed stamping-forge of mechanical press.The transmission system mainly consists of differential gear train,planetary gear train,crank linkage slide mechanism and two drive motors.Through controlling the two drive motors,two different speeds of the slider of mechanical press can be obtained.Its transmission system,not only can keep the working efficiency of mechanical press.but also can reduce the velocity of the slide.Based on the technological parameters of JH23-200 type mechanical press the new transmission system that meets the working demands of mechanical press is designed,which proves that this transmission scheme is practical and feasible. |
| |
| Keywords: | mechanical press differential gear train transmission system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
