首页 | 本学科首页   官方微博 | 高级检索  
     

密度对刨花板热压过程中表层与芯层压力的影响
引用本文:雷亚芳,刘艳贞. 密度对刨花板热压过程中表层与芯层压力的影响[J]. 西北农林科技大学学报(自然科学版), 2006, 34(9): 130-134
作者姓名:雷亚芳  刘艳贞
作者单位:西北农林科技大学,机械与电子工程学院,陕西,杨凌,712100
基金项目:西北农林科技大学校科研和教改项目
摘    要:研究了密度对刨花板热压过程中表层与芯层压力的影响,并对不同密度刨花板热压过程中芯层压力与芯层温度的关系进行了探讨。结果表明,随着密度增大,热压过程中刨花板板坯表层与芯层的压力最高值增大;板坯芯层汽化段的温度高低与此阶段板坯芯层的压力大小有关,板坯密度越大,芯层压力越大,汽化段温度也越高。

关 键 词:刨花板  表层压力  芯层压力  压板工艺
文章编号:1671-9387(2006)09-0130-05
收稿时间:2005-12-19
修稿时间:2005-12-19

Effect of density on the surface and central layers pressure of particleboard during hot-pressing
LEI Ya-fang,LIU Yan-zhen. Effect of density on the surface and central layers pressure of particleboard during hot-pressing[J]. Journal of Northwest A&F University(Natural Science Edition), 2006, 34(9): 130-134
Authors:LEI Ya-fang  LIU Yan-zhen
Affiliation:(College of Mechanical and Electrical Engineering,Northwest A & F University,Yangling,Shaanxi 712100,China)
Abstract:The paper presents the research of density's effect on the pressure of surface and central layers,and discusses the relationship of central layer's pressure and temperature.Results indicate that the pressure maximum values of both the surface and central layers increase with the increasing density of particleboard mat;the central layers temperature of evaporation stage is closely related to its pressure,and the temperature and the pressure of central layer is in direct proportion to the particleboard mat density.
Keywords:particleboard   surface layer pressure   central layer pressure   hot-pressing technology
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《西北农林科技大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《西北农林科技大学学报(自然科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号