| 薄壁回转体零件镍锰合金电铸的质量控制 |
| |
| 引用本文： | 杨建明,朱荻,王昆.薄壁回转体零件镍锰合金电铸的质量控制[J].农业机械学报,2007,38(4):177-180. |
| |
| 作者姓名： | 杨建明 朱荻 王昆 |
| |
| 作者单位： | 淮海工学院机械工程系,222005,江苏省连云港市;南京航空航天大学机电学院,210016,南京市 |
| |
| 摘 要： | 利用可以电铸回转体零件的装置，开展了薄壁回转体零件的镍锰合金电铸试验。通过采用优化象形阳极、选择合理的电铸工艺条件以及向电解液中加入添加剂等措施，很好地消除了电铸层的针孔，改善了电铸层的沉积分布，电铸层表面的粗糙得到了控制，电铸层的内应力较小。
|
| 关 键 词： | 电铸 质量控制 镍锰合金 回转体零件 |
| 收稿时间： | 2005-10-31 |
| 修稿时间： | 10 31 2005 12:00AM |
Quality Control of Ni-Mn Alloy Electroforming of Thin-wall Revolving Part |
| |
| Yang Jianming,Zhu Di,Wang Kun.Quality Control of Ni-Mn Alloy Electroforming of Thin-wall Revolving Part[J].Transactions of the Chinese Society of Agricultural Machinery,2007,38(4):177-180. |
| |
| Authors: | Yang Jianming Zhu Di Wang Kun |
| |
| Institution: | 1.Huaihai Institute of Technology 2.Nanjing University of Aeronautics and Astronautics |
| |
| Abstract: | The electroforming of Ni-Mn alloy for the thin-wall revolving part was carried out with a device that could be used to electroform a revolving part. By way of using a conformal anode, the selection of the suitable conditions of electroforming, and adding of an additive to the electrolyte, the pores of the electroformed layers were fully eliminated, the deposition distribution of the |
| |
| Keywords: | Electroforming Quality control Ni-Mn alloy Revolving part |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
