| 聚酯废水处理的设计与调试 |
| |
| 引用本文： | 马林,唐一. 聚酯废水处理的设计与调试[J]. 中国沼气, 2001, 19(3): 20-22,30 |
| |
| 作者姓名： | 马林 唐一 |
| |
| 作者单位： | 北京杰佳洁环境技术有限责任公司, |
| |
| 摘 要： | 聚酯废水是一种较难处理的高浓度废水,本文介绍了一种采用UASB(升流式厌氧污泥床反应器)+活性污泥法为主的工艺处理聚酯废水的工程实例.实践证明当进水COD6000mg*L-1,BOD52400mg*L-1左右时,经本工艺处理后出水COD小于150mg*L-1,完全可以达到排放标准.这种方法操作方便,运行管理简单.
|
| 关 键 词： | 聚酯废水 废水处理 UASB 活性污泥 |
| 文章编号： | 1000-1166(2001)03-0020-04 |
The Design and Start-up of Polyester Wastewater Treatment |
| |
| MA Ling,TANG Yi /. The Design and Start-up of Polyester Wastewater Treatment[J]. China Biogas, 2001, 19(3): 20-22,30 |
| |
| Authors: | MA Ling TANG Yi / |
| |
| Abstract: | Polyester wastewater is a kind of highs trength intractable wa stewater . This paper introduces a fullscale project of polyester wast ewater treatment w ith UASB(Upflow Anaerobic Sludge Blanket)Reactor and Activa ted Sludge System. It was proved that when the influent COD is about 6 000 mg~{!$~}L~{*,*)~}-1~{**~} and BOD~{*-~} 5 is about 2 400 mg~{!$~}L~{*,*)~}-1~{**~}, the effluent COD is below 150 mg~{!$~}L~{*,*)~}-1~{**~}, which can completely meet the nation al discharge standard. This process is convenient to operate and simple to man age. |
| |
| Keywords: | Polyester Wastewater Wastewater Treatment UASB Activated Sludge |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
