| 立式甩刀茎秆切碎装置虚拟设计与动态仿真分析 |
| |
| 引用本文： | 张士新 张道林 刁培松 李永伟 段洪峰. 立式甩刀茎秆切碎装置虚拟设计与动态仿真分析[J]. 农机博览, 2008, 0(2): 23-25 |
| |
| 作者姓名： | 张士新 张道林 刁培松 李永伟 段洪峰 |
| |
| 作者单位： | [1]山东理工大学轻工与农业工程学院,山东淄博255049 [2]山东省聊城监狱,山东聊城252000 |
| |
| 基金项目： | 山东省自然科学基金资助项目（2004ZX22）;国家科技支撑计划资助项目（2006BAD28802）. |
| |
| 摘 要： | 采用UG软件虚拟设计了玉米收获机中立轴式甩刀三维实体。并应用机械系统动力学分析软件ADAMS构建了三维运动仿真模型，实现了在ADAMS环境下甩刀运动仿真分析和甩刀切割玉米茎秆仿真分析。仿真结果表明，甩刀运动初期刀片运动不稳定，切割玉米茎秆时切割力大小真实可靠。
|
| 关 键 词： | 刀片 ADAMS 切割 仿真 |
| 文章编号： | 1673-3142（2008）02-0023-03 |
| 收稿时间： | 2007-11-27 |
Virtual Design and Kinematic Simulation for Vertical Shaft Spindle Cutter of Corn Harvester |
| |
| ZHANG Shi-xin,ZHANG Dao-lin, DIAO Pei-song, LI Yong-wei, DUAN Hong-feng. Virtual Design and Kinematic Simulation for Vertical Shaft Spindle Cutter of Corn Harvester[J]. , 2008, 0(2): 23-25 |
| |
| Authors: | ZHANG Shi-xin ZHANG Dao-lin DIAO Pei-song LI Yong-wei DUAN Hong-feng |
| |
| Abstract: | The 3D model of vertical shaft spindle cutter of corn harvester has been established by UG software and the mechanical dynamic software ADAMS was used to establish the 3D kinematic simulation model of the vertical shaft spindle cutter. Kinematic simulation for spindle cutter and cutting off corn stalk was accomplished with it. The results demonstrated that the movement of blades in initial time is not stable and the force of cutting off corn stalk is true and reliable. |
| |
| Keywords: | blade ADAMS cut off simulation |
| 本文献已被 维普 等数据库收录！ |
