首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一种撞击式喷头雾化特性研究
引用本文:赵德菱,邵孝侯.一种撞击式喷头雾化特性研究[J].农机化研究,2012(3):71-74.
作者姓名:赵德菱  邵孝侯
作者单位:河海大学水利水电学院;南京工业职业技术学院机械工程学院
基金项目:江苏省精密制造工程技术研究开发中心开放基金项目(ZK10-01-03)
摘    要:分析了撞击式喷头的雾化机理,通过实验研究了撞击式喷头的几种雾化液滴直径随喷雾压力变化的规律以及撞击式喷头的流量与喷雾压力之间的关系。实验表明:随着喷雾压力的升高、喷头的流量增大,雾滴的各种直径均降低,但喷雾压力对雾滴直径的影响是有限度的。该喷头的雾滴直径小,雾化特性能满足降温或加湿要求。

关 键 词:撞击式喷头  雾化特性  实验

Experimental Research on Atomization Characteristics of an Impinging Nozzle
Zhao Deling,Shao Xiaohou.Experimental Research on Atomization Characteristics of an Impinging Nozzle[J].Journal of Agricultural Mechanization Research,2012(3):71-74.
Authors:Zhao Deling  Shao Xiaohou
Institution:1(1.College of Conservancy and Hydropower Engineering,Hohai University,Nanjing 210009,China;2.College of Mechanical Engineering,Nanjing Institute of Industry Technology,Nanjing 210046,China)
Abstract:In this paper,atomization mechanism of an impinging nozzle was analyzed.The distribution of droplet diameters at different pressure of the nozzle was obtained by experimental research.The relationship between flow rate and pressure of the nozzle was presented.Experiments show that with the rise of spray pressure,the flow rate is increased,the droplet diameter is reduced,but the impact of pressure on droplet diameters is limited;the droplet diameter of the nozzle is fine and it can satisfy the requirements of cooling or moisturizing in high temperature or dry areas.
Keywords:an impinging nozzle  atomization characteristics  experiment
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号