Hydrous Ferric Oxide (HFO)—a Scavenger for Fluoride from Contaminated Water

Groundwaters contaminated with excess fluoride (above 1.5 mg/L) posed some risks to the public health in India. Methods available for fluoride contaminated water treatment are cogaulation–filtration using alum + lime + bleaching powder (Nalgonda technique) and adsorption using activated alumina. Use of aluminium compounds for water treatment purpose needs replacement on neurological health problem. Objective to this, the synthesis and fluoride adsorption behavior of hydrous ferric oxide (HFO) are reported here. It is seen that fluoride adsorption density varies as a function of pH, contact time, aging time, drying temperature and particle size of HFO. Highest adsorption density for fluoride is found to be at pH 4.0. Effects of competing anions in removing fluoride from solution were tested. Arsenite, arsenate, phosphate and sulfate show strong interfering effect at high anions to fluoride molar ratio in solution. Adsorption of fluoride on HFO follows the Freundlich isotherm and the Lagergren first-order kinetic model. It was also determined that HFO is a better adsorbent in removing fluoride from high fluoride groundwater than some other adsorbents. Regeneration of fluoride-rich HFO results showed that 1.0 M NaOH solution could be used up to a maximum of 75% regeneration.