| 竹-MMA复合材的制备及性能研究 |
| |
| 引用本文： | 孙芳利,文桂峰,周文军. 竹-MMA复合材的制备及性能研究[J]. 竹子研究汇刊, 2004, 23(1): 42-45 |
| |
| 作者姓名： | 孙芳利 文桂峰 周文军 |
| |
| 作者单位： | 浙江林学院工程学院,浙江,临安,311300 |
| |
| 基金项目： | This research was supported by the International Foundation For Science,Stockholm,Sweden，the Organization for the Prohibition of Chemical Weapons，The Hague,The Netherlands,through a grant to Fangli Sun.No.D/3284-1 |
| |
| 摘 要： | 采用真空注入法,将单体MMA注入竹材,然后以偶氮二异丁腈为催化剂,采用催化加热法聚合处理,制得竹-MMA复合材,测其力学性能和物理性能.结果表明:所制备的竹-MMA复合材比未经处理的素材,力学性能和物理性能都有明显提高.而且在本试验条件下,不同因素对竹-MMA复合材的制备及特定物理力学性能有着不同程度的影响.
|
| 关 键 词： | 竹材 真空注入法 加热聚合 竹-MMA复合材 |
| 修稿时间： | 2003-11-20 |
Studies on the Preparation and Characteristics of Bamboo-polymer Composite |
| |
| Sun Fangli Wen Guifeng Zhou Wenjun. Studies on the Preparation and Characteristics of Bamboo-polymer Composite[J]. Journal of Bamboo Research, 2004, 23(1): 42-45 |
| |
| Authors: | Sun Fangli Wen Guifeng Zhou Wenjun |
| |
| Abstract: | Through vacuum treatment,MMA and AIBN are impregnated into bamboo wood, and catalyst - heat processes are used to polymerize, thus the Bamboo-MMA (Bamboo-MMA for shorten) is produced. The testing results showed as the follows; both the physical and mechanical properties of the prepared bamboo-MMA are higher than that of the controlled bamboo wood. And in the testing condition, different factors have different impacts on certain physical and mechanical properties of the prepared bamboo-MMA. |
| |
| Keywords: | Bamboo Vacuum treatment Catalyst-heat processes Bamboo-MMA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
