| SQJ—Z小型嫁接器刀片热处理工艺研究 |
| |
| 引用本文： | 靳永宽,裘祖荣,郝巧玲.SQJ—Z小型嫁接器刀片热处理工艺研究[J].山西农业大学学报(自然科学版),1994(2). |
| |
| 作者姓名： | 靳永宽 裘祖荣 郝巧玲 |
| |
| 作者单位： | 山西农业大学 |
| |
| 摘 要： | 本文对ＳＱＪ─—Ｚ小型嫁接器刀片的选材和热处理工艺进行了研究。试验结果表明，采用６５Ｍｎ钢成型后的刀片进行等温分级淬火、低温回火的热处理工艺，可以使刀片获得硬度和强韧性的最佳配合。
|
| 关 键 词： | 刀片，65Mn钢，等温分级淬火 |
STUDY ON THE TECHNOLOGY OF HEAT TREATMENT FOR THE BLADE OF THE PORTABLE ENGRAFTING INSTRUMENT OF TYPE SQJ─Z |
| |
| Jin Yongkuan, Qiu Zhurong, Hao Qiaoling.STUDY ON THE TECHNOLOGY OF HEAT TREATMENT FOR THE BLADE OF THE PORTABLE ENGRAFTING INSTRUMENT OF TYPE SQJ─Z[J].Journal of Shanxi Agricultural University,1994(2). |
| |
| Authors: | Jin Yongkuan Qiu Zhurong Hao Qiaoling |
| |
| Abstract: | This paper is concerned with the choice of material for the blade of the portabla engrafting instrument of type SQJ-Z and the relevent technology of heat treatment. The test shows that, the technology of heat treatment of isothermal and broken hardening, low tempering done on the blades of 65Mn steel formed by cold punching gives an optimum combination of the hardness, strength and tenacity of the blades. |
| |
| Keywords: | Blade 65Mn steel Isothermal and broken hardening |
| 本文献已被 CNKI 等数据库收录！ |
