首页 | 本学科首页   官方微博 | 高级检索  
     

普通城门洞形隧洞正常水深的直接计算方法
引用本文:张宽地, 吕宏兴, 王光谦, 傅旭东. 普通城门洞形隧洞正常水深的直接计算方法[J]. 农业工程学报, 2009, 25(11): 8-12.
作者姓名:张宽地  吕宏兴  王光谦  傅旭东
作者单位:1.西北农林科技大学水利与建筑工程学院,杨凌 712100;2.清华大学水利水电工程系水沙科学与水利水电工程国家重点实验室,北京 100084
基金项目:国家973计划课题(2007CB407201);国家自然科学基金重点项目(40335050);西北农林科技大学创新团队建设计划(01140202)
摘    要:普通城门洞形过水断面是泄洪隧洞和灌溉引水隧洞较常采用的断面形式之一,其水力计算中的正常水深求解无显函数形式的表达公式。传统的试算法或查图法不仅计算过程繁琐,而且计算精度不高。该文通过对城门洞形断面均匀流方程进行数学变换,并对引入的无量纲参数与相对正常水深的关系进行分析及计算,应用逐步优化拟合原理进行拟合,得到了普通城门洞形断面均匀流水深的直接计算表达式。实例计算及误差分析表明:在工程实用范围内(正常水深与拱顶半径之比在0.20到1.55之间),直接计算公式最大相对误差不超过0.24%。且该式具有物理概念清晰明确、公式形式简捷等优点,可为工程设计及水工设计手册的编制提供有益的参考。

关 键 词:水力模型  水工结构  计算  正常水深  城门洞形断面
收稿时间:2008-12-04
修稿时间:2009-11-03

Direct calculation method for normal depth of arched section tunnel
Zhang Kuandi, Lü Hongxing, Wang Guangqian, Fu xudong. Direct calculation method for normal depth of arched section tunnel[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2009, 25(11): 8-12.
Authors:Zhang Kuandi  Lü Hongxing  Wang Guangqian  Fu xudong
Affiliation:1.College of Water Resources and Architectural Engineering, Northwest Agriculture and Forestry University, Yangling 712100, China;2.State Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing 100084, China
Abstract:The arched section is one of the usually adoptive section shapes in flood discharge tunnels and irrigation tunnels, but the analytic expression of normal water depth for this section is not explicit. Though the conventional trial and error method or the graph method can be implemented, it is time-consuming and imprecise. The uniform was transformed flow equation into its equivalence, and then the relationship between the relative normal water depth and the introduced dimensionless parameter was analyzed. Finally, by fitting the relationship based on the theory of optimization and regression, a direct expression for calculating the normal water depth of arched section channel was proposed. The practical example and error analysis illustrated the validity and effectiveness of the proposed direct expression. The absolute value of the maximum relative error was not greater than 0.24 percent among the utility range of engineering (the ratio of normal water depth to arch radius was from 0.20 to 1.55). The proposed method is clear in course, simple in calculation, and can be regarded as a useful supplement to the engineering design and the compilation of the hydraulic structure design handbook.
Keywords:hydraulic models   hydraulic structures   calculations   normal water depth   arched section
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《农业工程学报》浏览原始摘要信息
点击此处可从《农业工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号