The influence of curing conditions on the chemical distribution in wood modified with thermosetting resins

Scots pine (Pinus sylvestris L.) sapwood was impregnated with aqueous solutions of phenol formaldehyde and methylated melamine formaldehyde resins and subsequently cured in an oven. One set of specimens was cured in plastic bags to avoid drying (wet curing) while another set of samples was heated and water was allowed to freely evaporate (dry curing). Macroscopic resin distribution was investigated using X-ray densitometry and infrared spectroscopy (FTIR-ATR). During dry curing, the resins migrated to the wood surface resulting in a gradient. Wet curing resulted in even distribution of the resins because it was immobilized due to condensation and precipitation in the wood. Neither densitometry nor FTIR-ATR was found to be generally applicable for investigating resin distribution in modified wood. Wet curing resulted in low cell wall bulking as compared to dry curing, probably because resin precipitated before drying. Storing impregnated wood prior to curing under non-drying conditions (“diffusion phase”) also reduced cell wall penetration and bulking.