首页 | 本学科首页   官方微博 | 高级检索  
     

TBM施工隧道衬砌管片接缝防水设计研究
引用本文:游龙飞,卢文波,吴庆鸣,孙晓勇. TBM施工隧道衬砌管片接缝防水设计研究[J]. 中国农村水利水电, 2006, 0(7): 54-56,60
作者姓名:游龙飞  卢文波  吴庆鸣  孙晓勇
作者单位:1. 铁道第四勘察设计院,武汉,430063;水资源与水电工程科学国家重点实验室,武汉大学,武汉,430072
2. 水资源与水电工程科学国家重点实验室,武汉大学,武汉,430072
3. 武汉大学,武汉,430072
摘    要:TBM施工隧道装配式管片渗漏水的位置主要是管片的接缝,遇水膨胀橡胶是TBM施工隧道装配式管片接缝所用的主要防水材料。主要阐述了遇水膨胀橡胶的止水机理,讨论了高水压条件下遏水膨胀橡胶失效的模式,通过对接缝面压力的计算和材料力学特征的分析,提出了TBM装配式管片接缝防水材料硬度的计算方法及接缝面形式设计方法。对TBM施工隧道的防水设计具有较高的参考价值。

关 键 词:TBM施工隧道  管片  膨胀橡胶  接缝防水
文章编号:1007-2284(2006)07-0054-03
收稿时间:2005-10-31
修稿时间:2005-10-31

Study on Waterproof Design of Pipe Joint of Lined Tunnel in TBM Construction
YOU Long-fei, LU Wen-bo, WU Qing-ming, SUN Xiao-yong. Study on Waterproof Design of Pipe Joint of Lined Tunnel in TBM Construction[J]. China Rural Water and Hydropower, 2006, 0(7): 54-56,60
Authors:YOU Long-fei   LU Wen-bo   WU Qing-ming   SUN Xiao-yong
Affiliation:1. The Fourth Design Institute of Railway Ministry, Wuhan City 430063, China; 2. State Key Lab of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072
Abstract:The main seepage of assembly pipe in the TBM construction tunnel happens at the joint of pipes, and the water-expansion rubber is the main waterproof material for the assembly pipe joint in the TBM construction tunnel. The mechanism of waterproof of water-expansion rubber is expatiated, and the failure mode of water-expansion rubber under high water pressure is discussed. Through analysis of the pressure calculation and material mechanics features at joint interface, the calculation methods for the waterproof material rigidity of TBM assembly pipe joint and design methods for the joint interface are presented. The study has reference value for waterproof design of TBM construction tunnel.
Keywords:TBM construction tunnel   pipe   expansion rubber   joint waterproof
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号