| 松木单板/塑料复合胶合板制备工艺及胶合性能研究 |
| |
| 引用本文： | 张桂兰,李大为,王平.松木单板/塑料复合胶合板制备工艺及胶合性能研究[J].内蒙古农业大学学报(自然科学版),2008,29(1):140-143. |
| |
| 作者姓名： | 张桂兰 李大为 王平 |
| |
| 作者单位： | 1. 内蒙古农业大学林业工程学院,呼和浩特,010018
2. 内蒙古根河板业公司质检中心,根河 |
| |
| 摘 要： | 为了改善生态环境,获得1种无游离甲醛释放的绿色人造板.本文以樟子松单板、塑料-低密度聚乙烯(LDPE)为主要原料,采用热压胶合方式来开展木塑复合胶合板的制备工艺及性能研究.同时,以胶合强度为主要指标对木塑复合胶合板的性能进行评价,考察工艺参数对材料性能的影响.结果表明:复合温度为160℃,偶联剂加入量为3%时,材料的胶合强度最好.复合时间对复合材料的影响不显著.经方差分析和极差分析知:最佳工艺条件为复合温度为160℃,偶联剂加入量为3%,复合时间为3min.
|
| 关 键 词： | 樟子松单板 塑料 胶合板 制备工艺 胶合性能 |
| 文章编号： | 1009-3575(2008)01-0140-04 |
| 修稿时间： | 2007年9月13日 |
STUDY ON THE PROCESS OF MANUFACTURING AND PERFORMANCE OF PINUS SYLESTRIS VENEER/PLASTIC COMPOSITED PLYWOOD |
| |
| ZHANG Gui-lan,LI Da-wei,WANG Ping.STUDY ON THE PROCESS OF MANUFACTURING AND PERFORMANCE OF PINUS SYLESTRIS VENEER/PLASTIC COMPOSITED PLYWOOD[J].Journal of Inner Mongolia Agricultural University(Natural Science Edition),2008,29(1):140-143. |
| |
| Authors: | ZHANG Gui-lan LI Da-wei WANG Ping |
| |
| Institution: | 1.College of Forestry Engineering Inner Mongolia Agricultural university;Huhoot 010018;China;2.Quality Testing Center of Genhe Board Industry Company of Inner Mongolia;Genhe;China |
| |
| Abstract: | In order to improve ecological environment,a kind of wood-based panel without free formaldehyde was expected.This paper took the pinus sylestris veneer,plastic-low density polyethylene(LDPE)as the main raw materials to study the technological process of production and performance of wood/plastic composited plywood by hot pressing.At the same time,the performance such as bond strength of wood/plastic composited plywood was evaluated and the influences of technological parameters to the performance of the mat... |
| |
| Keywords: | Pinus sylestris veneer plastic plywood composite technology bond performance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
