| 平地机刀鼓设计与切抛效果研究 |
| |
| 引用本文： | 姜海勇,齐晓娜,刘江涛,弋景刚,邢雅周,陈静.平地机刀鼓设计与切抛效果研究[J].农机化研究,2007(10):46-48. |
| |
| 作者姓名： | 姜海勇 齐晓娜 刘江涛 弋景刚 邢雅周 陈静 |
| |
| 作者单位： | 1. 河北农业大学,机电工程学院,河北,保定,071001
2. 保定金融高等专科学校,计算机科学与技术系,河北,保定,071009 |
| |
| 摘 要： | 研究平地机主要工作部件铣切刀鼓,使其在清平过程中既能切平土体表面又能将土方抛出机外,以便于后续的碎土清理工作顺利进行.对比切削与顺逆铣工作方式,研究设计出螺旋状刀片以及由此种刀片对称布置所组成的滑切汇中式切抛刀鼓.根据清平机工作特点修正参数,并计算刀片的切抛土功耗,为动力装置选型提供依据.经计算与试验表明,清平表面不平度满足平地施工的技术精度要求.
|
| 关 键 词： | 农业工程 平地机 理论研究 切抛 表面不平度 平地机 设计 效果 研究 Analysis Efficiency Machine Shaft Cutting 精度要求 施工 不平度 表面 计算与试验 选型 动力装置 功耗 抛土 修正参数 中式 |
| 文章编号： | 1003-188X（2007）10-0046-03 |
| 收稿时间： | 2007-03-02 |
| 修稿时间： | 2007-03-02 |
Design of Cutting Shaft for Scraper Machine and the Efficiency Analysis |
| |
| JIANG Hai-yong,QI Xiao-na,LIU Jiang-tao,YI Jing-gang,XING Ya-zhou,CHEN Jing.Design of Cutting Shaft for Scraper Machine and the Efficiency Analysis[J].Journal of Agricultural Mechanization Research,2007(10):46-48. |
| |
| Authors: | JIANG Hai-yong QI Xiao-na LIU Jiang-tao YI Jing-gang XING Ya-zhou CHEN Jing |
| |
| Institution: | 1.College of Mechanical and Electrical Engineering, Agricultural UniversitY of Hebei, Baoding 071001, China; 2.Department of Computer Science and Technology, Baoding Schools of Finance, Baoding 071009, China |
| |
| Abstract: | The cutting shaft as a main part of the Scraper Machine has been studied. It should have the ability of evening the ground face and of casting the scraping out of the machine. Based on the contrast between climb cutting and conventional cutting, designed the kind of knife with a screwy body. Assemble the enantiomorphous screwy knives together to construct the gathering slide cutting and casting shaft. The power consumption has been calculated for the motivate choice. The examination and calculation indicated that the flat quality has reached the construction rule. |
| |
| Keywords: | agricultural engineering trench-leveling machine theoretical research cutting and casting flat quality |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
