| 通过研究犁体曲面的设计方法论曲面的实体建模 |
| |
| 引用本文： | 廖丽,杨坚,蔡龙. 通过研究犁体曲面的设计方法论曲面的实体建模[J]. 农业机械化与电气化, 2008, 0(6) |
| |
| 作者姓名： | 廖丽 杨坚 蔡龙 |
| |
| 作者单位： | 广西大学机械工程学院; |
| |
| 摘 要： | 通过分析犁体曲面的设计方法,使用三维参数化建立水平直元线型犁体曲面的数学模型。在Pro/E中构造曲面的实体模型,弥补了平面作图设计中的缺陷和不足,较好地分析了曲面的质量,为后继犁体曲面的动力学仿真分析奠定了良好的基础。
|
| 关 键 词： | 农业工程 犁体曲面 设计方法 数学模型 三维建模 |
Discussion on the Solid Modeling of Surface by Studying the Design Method of Plough Surface |
| |
| LIAO Li,YANG Jian,CAI Long. Discussion on the Solid Modeling of Surface by Studying the Design Method of Plough Surface[J]. , 2008, 0(6) |
| |
| Authors: | LIAO Li YANG Jian CAI Long |
| |
| Affiliation: | LIAO Li,YANG Jian,CAI Long (College of Mechanical Engineering,Guangxi University,Nanning 530004,China) |
| |
| Abstract: | The mathematical model of horizontal straight-line plough surface was established using three-dimensional parametric by analyzing the design method of plough surface. The solid model of surface constructed in Pro/E compensated the defects and shortcomings in the planar graphical design and analyzed the surface quality well, which laid foundation for the later dynamics simulation analysis of plough body surface. |
| |
| Keywords: | agricultural engineering plough surface design method mathematical model three-dimensional model |
| 本文献已被 CNKI 等数据库收录！ |
|
