| 弧形深松铲的有限元分析——基于Pro/E5.0与ANSYS Workbench |
| |
| 引用本文： | 袁军,王景立.弧形深松铲的有限元分析——基于Pro/E5.0与ANSYS Workbench[J].农机化研究,2012(1):37-40. |
| |
| 作者姓名： | 袁军 王景立 |
| |
| 作者单位： | 吉林农业大学工程技术学院 |
| |
| 基金项目： | 吉林省科技厅资助项目(20090212) |
| |
| 摘 要： | 采用Pro/E 5.0软件建立弧形深松铲的三维模型,并将三维模型导入到ANSYS Workbench中,在Work-bench中对其进行结构强度、刚度校核以及模态分析,得到其在工作载荷下的变形、应力和模态频率,并在结构尺寸上进行优化设计,使其在结构强度上得到了改进。
|
| 关 键 词： | 深松铲 Pro/E ANSYS Workbench 有限元 |
Finite Element Analysis of Strength of Curved Sub-soiling Shovel Based on Pro/E 5.0 and ANSYS Workbench |
| |
| Yuan Jun,Wang Jingli.Finite Element Analysis of Strength of Curved Sub-soiling Shovel Based on Pro/E 5.0 and ANSYS Workbench[J].Journal of Agricultural Mechanization Research,2012(1):37-40. |
| |
| Authors: | Yuan Jun Wang Jingli |
| |
| Institution: | (College of Engineering Technology,Jilin Agricultural University,Changchun 130118,China) |
| |
| Abstract: | The 3-D model of curved sub-soiling shovel was created,using Pro/E 5.0 software,and the model was sent to ANSYS workbench.The finite element analysis of curved sub-soiling shovel model was carried out with workbench.The strength and rigidity of structural was studied.The distortion,stress and modal frequency of curved sub-soiling in service load were obtained.The dimension of the curved sub-soiling shovel was modified based on the analysis result,and the strength and rigidity of structural were optimized. |
| |
| Keywords: | sub-soiling Pro/E ANSYS Workbench finite element analysis |
| 本文献已被 CNKI 等数据库收录！ |
