Determination of soil water content by X-ray computed tomography and magnetic resonance imaging

Summary Experiments were conducted to compare the use of X-ray computed tomography (CT) and magnetic resonance imaging (MRI) methods for determining water content in soil. Soil cores of Mexico silt loam packed at bulk densities of 1.2, 1.3, 1.4, and 1.5 Mg/m³ and Crider silty clay packed at bulk densities of 1.3, 1.4, 1.5, and 1.6 Mg/m³ were evaluated using a CT scanner. Results indicate that the X-ray CT explained 98% of the variation in water content over a range from air-dry to saturation. Three attempts were made to obtain MRI scans of soil cores varying in soil water content. Two of these attempts were made with contrasting agents. No images were obtained of the soil cores during all three attempts. It is suggested that the failure to obtain images of soil cores is closely related to the settings of the pulse repetition time and the spin echo time on the MRI unit. The range in settings for these two parameters on the commercial MRI unit used in this study did not allow short increments to be selected and therefore it was not possible to obtain reconstructed images of the soil cores for this experiment. However accessibility to a prototype MRI unit should allow more conclusive work to determine the full capabilities of MRI for determining soil water content.Contribution from the Missouri Agricultural Experiment Station Journal No. 10424, Department of Agronomy, University of Missouri, Columbia, MO 65211, USA