首页 | 本学科首页   官方微博 | 高级检索  
     

旋转脱膜式残膜回收机关键部件仿真与模态分析
引用本文:郑士琦,王敏,营雨琨,卢勇涛,王吉亮,秦朝民,何玉泽,李净凯. 旋转脱膜式残膜回收机关键部件仿真与模态分析[J]. 农机化研究, 2022, 44(4): 37-43. DOI: 10.3969/j.issn.1003-188X.2022.04.007
作者姓名:郑士琦  王敏  营雨琨  卢勇涛  王吉亮  秦朝民  何玉泽  李净凯
作者单位:石河子大学 机械电气工程学院, 新疆 石河子 832000;新疆农垦科学院 机械装备研究所, 新疆 石河子832000
基金项目:新疆生产建设兵团中青年科技创新领军人才计划项目(2019CB020);兵团重点领域科技攻关项目(2018AB013)。
摘    要:设计了一种旋转脱膜式残膜回收机具,针对搂膜弹齿不稳定造成残膜回收率降低的问题,通过Ansys软件对其进行仿真分析和模态分析,得出主搂膜弹齿等效最大应力232.15MPa,总位移为10.2mm,副搂膜弹齿等效最大应力138.737MPa、总位移为6.7mm,所得数据均小于设计最大值;二者前6阶固有频率范围分别为17.7~292.1Hz和25.1~292.1Hz,不在所受外界激振频率范围内,作业过程中不会产生共振现象。本研究可为弹齿式残膜回收机的设计提供参考。

关 键 词:残膜回收机  弹齿式捡拾部件  仿真分析  模态分析

Simulation Analysis and Modal Analysis of the Key Components of the Rotary Unloading Residual Plastic Film Recycling Machine
Zheng Shiqi,Wang Min,Ying Yukun,Lu Yongtao,Wang Jiliang,Qin Zhaomin,He Yuze,Li Jingkai. Simulation Analysis and Modal Analysis of the Key Components of the Rotary Unloading Residual Plastic Film Recycling Machine[J]. Journal of Agricultural Mechanization Research, 2022, 44(4): 37-43. DOI: 10.3969/j.issn.1003-188X.2022.04.007
Authors:Zheng Shiqi  Wang Min  Ying Yukun  Lu Yongtao  Wang Jiliang  Qin Zhaomin  He Yuze  Li Jingkai
Affiliation:(College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China;College of Mechanical and Electronical Engineering, Shihezi University, Shihezi 832000,China)
Abstract:In this paper,a Rotary Unloading Residual Plastic Film Recycling Machine is designed.For the stability problem of the membrane-retaining elastic teeth of the machine,simulation analysis and modal analysis are carried out by Ansys software to obtain the equivalent maximum stress of the main-retaining membrane elastic teeth 232.15 MPa,the total displacement is 10.2 mm,the equivalent maximum stress of the secondary armature elastic teeth is 138.737 MPa,and the total displacement is 6.7 mm,the data obtained are less than the design maximum;the first 6 natural frequencies of the two ranges from 17.7 Hz to 292.1 Hz and 25.1 Hz to 292.1 Hz,the natural frequency range of the two is not within the frequency range of the external excitation,and no resonance phenomenon will occur during the operation.This article can provide a reference for the design of elastic tooth residual film recycling machine.
Keywords:residual film recovery machine  spring-tooth pick-up part  simulation analysis  modal analysis
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号