| 荷木小径材弯曲工艺 |
| |
| 引用本文： | 叶翠仙,陆继圣,刘经榜. 荷木小径材弯曲工艺[J]. 福建林学院学报, 2001, 21(2): 135-138 |
| |
| 作者姓名： | 叶翠仙 陆继圣 刘经榜 |
| |
| 作者单位： | 1. 福建林学院,
2. 南平市太平洋行制品有限公司, |
| |
| 基金项目： | 福建省教育委员会科学基金资助项目! (JA981112 ) |
| |
| 摘 要： | 通过对荷木小径材薄板水煮软化工艺的研究 .结果表明该弯曲工艺可行 ,不使用金属钢板时弯曲性能可达 1 /1 7.最佳的工艺条件为 :水煮温度 80°C、水煮时间 1 5min/mm、初含水率2 5% ,并建立了软化工艺参数与试件弯曲质量的数学模型 ,作为实际生产的理论依据
|
| 关 键 词： | 荷木小径材 软化工艺 弯曲质量 数学模型 |
| 文章编号： | 1001-389X(2001)02-0135-04 |
| 修稿时间： | 2000-09-25 |
Technology of Bending for Small-diameter Logs of Schima superba |
| |
| YE Cui-xian,LU Ji-sheng,LIU Jing-bang. Technology of Bending for Small-diameter Logs of Schima superba[J]. Journal of Fujian College of Forestry, 2001, 21(2): 135-138 |
| |
| Authors: | YE Cui-xian LU Ji-sheng LIU Jing-bang |
| |
| Abstract: | The softening technology with heated water of sliced veneers from small-diamete r logs of Schima superba was studied in this paper. The res ults showed that thetechnology of bending was feasible, and the property of bend ing of Schima superba could get 1/17 without using metallic board.The optimum technology parameters were 80 ℃ of steaming temperature,15 min/mm of steaming time and 25% of early moisture.And the relationship model be tween quality of bending of sample and parameters of softening technology were e stablished,which would provide theoretical basic for practical production. |
| |
| Keywords: | small diameter logs of Schima superba technology of softening quality of bending mathematics model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
