| 不同初植密度对巨桉木材纤维形态的影响 |
| |
| 引用本文： | 闭梅松,邱坚,姜远标.不同初植密度对巨桉木材纤维形态的影响[J].桉树科技,2008(1):7-10. |
| |
| 作者姓名： | 闭梅松 邱坚 姜远标 |
| |
| 作者单位： | 西南林学院木质科学与装饰工程学院,云南,昆明,650224 西南林学院木质科学与装饰工程学院,云南,昆明,650224 普洱市林业科学研究所,云南,普洱,665100 |
| |
| 基金项目： | 云南省自然科学基金重点项目（2006C007Z）; 云南省中青年学术带头人后备人才项目（2006PY01-19）联合资助部分研究内容 |
| |
| 摘 要： | 对不同初植密度（2.0m×4.0m、3.0m×3.0m、3.0m×4.0m）20年生巨桉胸径处外缘材纤维形态特征（纤维长度、宽度、壁厚、腔径、长宽比和壁腔比）进行测定和分析,旨在为定向培育巨桉人工林提供基础数据。研究结果表明：随初植密度的增大,纤维长度、宽度、壁厚、腔径先增大后减小,以3.0m×3.0m的最大;纤维长宽比和壁腔比先减小后增大,3.0m×4.0m的纤维长宽比和壁腔比最大。本研究认为3.0m×3.0m的纤维形态特征为最好。
|
| 关 键 词： | 巨桉人工林 初植密度 纤维形态 |
Effects of Planting Density on Fiber Configuration of Eucalyptus grandis |
| |
| Institution: | BI Mei-song; QIU Jian; JIANG Yuan-biao (1. Faculty of Wood Science and Decoration Engineering, Southwest Forestry College, Kunming 650224, Yunnan,China; 2. Forestry Science Institute of Pu＇er City, Pu＇er 665100, Yunnan, China) |
| |
| Abstract: | The determination and analysis of the fiber morphology of E.grandis marginal wood in diameter at breast high about 20-year-old in different planting density （2.0 m×4.0 m,3.0 m×3.0 m,3.0 m×4.0 m）were performed to make a reference to plantation orientation of E.grandis. The results showed： the fiber length, width, thickness and lumen diameter increased first and then decreased with the planting density increase, 3.0 m × 3.0 m planting density had the best values. The ratio of length to width and the ratio of cell-wall thickness to lumen diameter decreased first and then increased. The ratio of length to width and the ratio of cell-wall thickness to lumen diameter in planting density of 3.0 m × 4.0 m were larger than in the others. This study concluded that 3.0 m×3.0 m was the best planting density for the fiber morphology. |
| |
| Keywords: | plantation of E grandis planting density fiber morphology |
| 本文献已被 维普 等数据库收录！ |
|
