| 高频电气喷射阀优化设计与试 |
| |
| 引用本文： | 向忠,刘昊,陶国良.高频电气喷射阀优化设计与试[J].农业机械学报,2009,40(4):210-214. |
| |
| 作者姓名： | 向忠 刘昊 陶国良 |
| |
| 作者单位： | 浙江大学流体传动及控制国家重点实验室,杭州,310027 |
| |
| 基金项目： | 国家自然科学基金，高等学校博士学科点专项科研基金，浙江省教育基金 |
| |
| 摘 要： | 建立了高频电气喷射阀电磁铁的有限元分析模型.在静态有限元分析基础上,通过减小喷射阀衔铁外径及在其中心钻孔对电磁铁结构进行了优化设计.优化后模型的结构尺寸及提供的稳态电磁力均与优化前相当,而衔铁质量下降71%,故其加速度大幅上升,使得优化后模型的动态响应时间在各工作状况下均约缩短8%.最后,根据优化后电磁铁模型加工制造了电气喷射阀样机,并研制了其动态性能测试系统.试验与仿真结果吻合,验证了仿真模型的有效性.
|
| 关 键 词： | 高频喷射阀 优化设计 仿真 试验 |
Design and Test of High-speed Electro-pneumatic Ejector Valve |
| |
| Xiang Zhong,Liu Hao,Tao Guoliang.Design and Test of High-speed Electro-pneumatic Ejector Valve[J].Transactions of the Chinese Society of Agricultural Machinery,2009,40(4):210-214. |
| |
| Authors: | Xiang Zhong Liu Hao Tao Guoliang |
| |
| Institution: | State Key Laboratory of Fluid Power Transmission and Control;Zhejiang University;Hangzhou 310027;China |
| |
| Abstract: | A finite element simulation model of the high-speed electro-pneumatic ejector valve actuator was built to analyze its steady state and transient performances. Optimal design was implemented by turning the fringe part and boring the center part of the armature base on steady state finite element analysis.Comparing with the original actuator,the optimized actuator has an almost 71% reducing in the armature weight whilst without significant steady state solenoid force loss in the actuator and without significa... |
| |
| Keywords: | High-speed ejector valve Optimal design Simulation Test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
