Multiresidue HPLC methods for phenyl urea herbicides in water

High-performance liquid chromatography (HPLC) methods for the determination of phenyl urea herbicides in water are described. The target compounds include chlortoluron, diuron, fluometuron, isoproturon, linuron, metobromuron, metoxuron, monuron, neburon, and siduron. Water was subjected to solid phase extraction (SPE) using either automated SPE with 47 mm C(18) Empore disks or on-line precolumn concentration. Herbicides were separated on a C(18) reversed phase column with an acetonitile-water gradient and were detected with either a diode array detector (DAD) or a postcolumn photolysis and derivatization (PPD) detector system. Photolysis converted the phenyl ureas to monoalkylamines that were derivatized to fluorescent isoindoles by reaction with o-phthalaldehyde and 2-mercaptoethanol. The DAD monitoring at 245 nm was linear over three decades with instrument detection limits of approximately 0.01 mg/L. SPE efficiency was between 48 and 70% in laboratory reagent water, but use of the internal standard quantitation method improved accuracy. High total dissolved solids and total organic carbon values in surface water improved recoveries relative to laboratory reagent water for all of the phenyl ureas. In Colorado River water spiked at 1 or 50 microg/L, mean recoveries ranged from 74 to 104%. Method detection limits (MDLs) ranged from 4 to 40 ng/L (parts per trillion) with the DAD instrument. PPD detection was highly specific but resulted in a slight loss in chromatographic efficiency and average MDLs approximately 5 times higher using a single set of detection conditions. The study indicates that methods based on SPE followed by HPLC with diode array or PPD detection have practical utility for trace analysis of phenyl ureas in drinking water or surface waters.