| 三轮汽车和低速货车右支撑管5孔钻模及夹具体设计 |
| |
| 引用本文： | 孙凤坤,邢泽炳. 三轮汽车和低速货车右支撑管5孔钻模及夹具体设计[J]. 农业装备与车辆工程, 2014, 0(7): 63-67 |
| |
| 作者姓名： | 孙凤坤 邢泽炳 |
| |
| 作者单位： | 山西农业大学工学院,山西省太谷县030801 |
| |
| 摘 要： | 针对右支撑管上的5孔钻孔加工进行了钻模的形式及尺寸设计,同时设计出钻孔过程中定位所需的专用定位元件,选择了各定位元件的最佳形式及尺寸,并设计出加工过程所需的专用夹具。在对零件技术要求严格分析的基础上,在理论上设计出一套安装方便、制造经济可行的专用钻夹具。
|
| 关 键 词： | 支撑管 钻模 定位元件 夹具体 |
Design of Five-hole Drilling Mould and Clamp for the Right Support Tube of Tri-wheelers and Low-speed Vehicles |
| |
| Sun Fengkun,Xing Zebing. Design of Five-hole Drilling Mould and Clamp for the Right Support Tube of Tri-wheelers and Low-speed Vehicles[J]. Agricultural Equipment & Vehicle Engineering, 2014, 0(7): 63-67 |
| |
| Authors: | Sun Fengkun Xing Zebing |
| |
| Affiliation: | (Engineering College in Shanxi Agricultural University, Taigu County, Shanxi Province 030801, China) |
| |
| Abstract: | Mainly for the form and size design of drilling mould for the right support tube on the five-hole drilling, and some special positioning components that are required in drilling process are also designed. The best form and size of the positioning component is selected in this paper. Based on strict analysis of the part＇s technology, a set of special drilling mould which is convenient to install and economic to manufacture is established, in order to reduce the manufacturing time and the cost. |
| |
| Keywords: | support tube drilling mould positioning element clamp |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
