| 基于ADAMS的汽车麦弗逊式前悬架建模仿真及优化 |
| |
| 引用本文： | 程磊华,薛昊强,齐超飞.基于ADAMS的汽车麦弗逊式前悬架建模仿真及优化[J].农业装备与车辆工程,2014(9):46-49. |
| |
| 作者姓名： | 程磊华 薛昊强 齐超飞 |
| |
| 作者单位： | 陕西省西安市长安大学汽车学院,710064 |
| |
| 摘 要： | 麦弗逊式独立悬架被广泛应用在现代的乘用车里,以麦弗逊式前悬为研究对象,利用了虚拟样机软件ADAMS,在ADAMS/Car中建立麦弗逊式前悬的模型,并对其进行了仿真,然后利用ADAMS/Insight对9个硬点坐标值中对前悬定位参数有较大影响的坐标值进行了优化,并利用后处理模块ADAMS/PostProcessor得到优化后的结果,成功得到了该车辆前悬的最优选型方案。
|
| 关 键 词： | 麦弗逊式悬架 ADAMS 前轮定位参数 仿真分析 优化设计 |
Simulation Analysis and Optimization Design of McPherson Suspension System Based on ADAMS |
| |
| Cheng Leihua,Xue Haoqiang,Qi Chaofei.Simulation Analysis and Optimization Design of McPherson Suspension System Based on ADAMS[J].Agricultural Equipment & Vehicle Engineering,2014(9):46-49. |
| |
| Authors: | Cheng Leihua Xue Haoqiang Qi Chaofei |
| |
| Institution: | (School of Automobile,Chang＇an University,Xi＇an City, Shaanxi Province 710064,China) |
| |
| Abstract: | McPherson suspension is widely used in modern cars. In this research, the model of the McPherson suspension is set up in ADAMS/Car by the virtual prototype software ADAMS first, then the simulation is carried on, and next the coordinate values of the nine hard point coordinates which have great influence to the front suspension positioning parameters are optimized using ADAMS/Insight, and the optimized result is got by the post-processing module of ADAMS/PostProcessor, finally, the optimization of McPherson suspension is achieved. |
| |
| Keywords: | McPherson suspension ADAMS front wheel alignment simulate analysis optimization design |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
