Studies on Measurement of Moisture Content by X-ray Scanning Method |
| |
| Authors: | Yu Le Lv Jianxiong Li Xianjun Xu Jinmei Hao Xiaofeng Jiang Jiali |
| |
| Affiliation: | School of Material Science and Engineering,Central South University of Forestry & Technology;Key Laboratory of Wood Science and Technology of State Forestry Administration,Research Institute of Wood Industry,Chinese Academy of Forestry |
| |
| Abstract: | In order to explore the feasibility of using X-ray to measure moisture content in the drying process and have a further study on the effect of precision of moisture content when scanning through different grain directions,X-ray scanning method and weighting method were used to measure average moisture content of Cunninghamia lanceolata during hot air drying.The results show that the moisture content values of two methods were very close to one another,the determination coefficients of both were highly correlated with a value over 0.99,and the absolute deviation was below 2%;when scanning along radial direction and longitudinal direction,the precisions of average moisture content were higher than that of the tangential direction,but the deviation can be negligible in the actual measurement;in the practical application,the effect of grain direction on precision of moisture content measurement could not be taken into account when using X-ray to measure the moisture distribution of wood. |
| |
| Keywords: | X-ray scanning moisture content wood drying grain direction |
| 本文献已被 维普 等数据库收录！ |
|
