首页 | 本学科首页   官方微博 | 高级检索  
     

两种常温固化木材胶粘剂胶接强度分析
引用本文:岳孔,卢晓宁,黄河浪,那斌. 两种常温固化木材胶粘剂胶接强度分析[J]. 林业科技开发, 2007, 21(2): 54-57
作者姓名:岳孔  卢晓宁  黄河浪  那斌
作者单位:南京林业大学木材工业学院
摘    要:对两种木材用常温固化胶粘剂--单宁-甲醛胶粘剂和聚氨酯胶粘剂胶接的速生杨木的静态剪切强度进行了测试与分析.研究结果表明,以速生杨I-72为被胶接对象,自制的双组分型单宁胶压缩剪切强度范围为8.08~8.92MPa,但木破率较低,要满足日本集成材JAS标准中用胶规定,需进一步研究改进.相比较而言,聚氨酯胶粘剂的胶接强度较高,其压缩剪切强度值均在9.8MPa以上,木破率在75%以上,能够满足日本集成材JAS标准中用胶的规定.

关 键 词:单宁胶  聚氨酯胶  剪切强度  木破率
收稿时间:2006-12-28
修稿时间:2007-01-10

Analysis of Bonding Strength of Two Room-temperature-curing Wood Adhesives
YUE Kong,LU Xiao-ning,HUANG He-lang,NA Bin. Analysis of Bonding Strength of Two Room-temperature-curing Wood Adhesives[J]. China Forestry Science and Technology, 2007, 21(2): 54-57
Authors:YUE Kong  LU Xiao-ning  HUANG He-lang  NA Bin
Affiliation:College of Wood Science and Technology,Nanjing Forestry University,210037 ,Nanjing,China
Abstract:The static compressing shear strength performance of fast-grown poplar samples bonded with two room-temperature-curing wood adhesives,tannin-formaldehyde adhesives(TF)and PUR adhesives,was evaluated and analyzed in this paper.The results showed compression shear strength values of I-72 poplar samples bonded with TF adhesive ranged form 8.08MPa to 8.92MPa.However,its wood failure ratio was not very high,and it was necessary to improve it to meet Japanese Glulam Standard JAS.Those strength values bonded with PUR was much better than those by TF.The values were more than 9.8MPa,wood failure ratio was over 75%,and could meet JAS.
Keywords:Tannin-formaldehyde adhesives  PUR adhesives  Shear strength  Wood failure ratio
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号