| 短周期工业用材多锯片剖分过程的数学模拟研究 |
| |
| 引用本文： | 朱国玺 霍桂珍. 短周期工业用材多锯片剖分过程的数学模拟研究[J]. 林业科学, 1994, 30(6): 556-560 |
| |
| 作者姓名： | 朱国玺 霍桂珍 |
| |
| 作者单位： | 东北林业大学，哈尔滨轻工学校 |
| |
| 摘 要： | 采用截顶椭圆一抛物面原木数学模型，应用原木的四个实测参数，测定出经多锯片裁分锯剖分的各块毛边板、板皮的精确材积；精确算出锯路的损耗和出材率。应用本文提出的理论，可以设计出简单的多锯片裁分锯数控检测系统，使短周期工业用材加工实现数控化。
|
| 关 键 词： | 小径木，多片锯，模型，数控 |
THE MATHEMATICAL SIMULATE RESEARCH OF THE SHORT FELLING CYCLEPOLE-TIMBERS ON SAWING WERE RIPPED BY SLASHER SAW |
| |
| Zhu Guoxi,Ma Yan,Lu Jun,Huo Guizhen,Guan Xiaoping. THE MATHEMATICAL SIMULATE RESEARCH OF THE SHORT FELLING CYCLEPOLE-TIMBERS ON SAWING WERE RIPPED BY SLASHER SAW[J]. Scientia Silvae Sinicae, 1994, 30(6): 556-560 |
| |
| Authors: | Zhu Guoxi Ma Yan Lu Jun Huo Guizhen Guan Xiaoping |
| |
| Affiliation: | Zhu Guoxi;Ma Yan;Lu Jun;Huo Guizhen;Guan Xiaoping (The Northeast Forestry University Harbin 150040)He Guizhen(The Harbin Light Industry Technology Secondary Shool Harbin 150080) |
| |
| Abstract: | Using the ellips-parabolid log model with the four practical measurable parameters, it is measured that the exact volume of all the uncut-boards and clabs cut by the multi-bit ripping edger. The loss of the saw Kerf and recovery have be accurately calculated. By the theroies, a quite simple NC detecting system of the multi-bit ripping eddger will be desinged which made the numerical control for the maching of short cycle wood for timber industry realizable. |
| |
| Keywords: | Small log Slashersaw Model No |
| 本文献已被 CNKI 维普 等数据库收录！ |
