| 犁铧刃口磨损规律的试验研究 |
| |
| 引用本文： | 亢银霞,王频.犁铧刃口磨损规律的试验研究[J].新疆农业大学学报,2000,23(1):62-64. |
| |
| 作者姓名： | 亢银霞 王频 |
| |
| 作者单位： | 新疆农业大学机械交通学院,乌鲁木齐 |
| |
| 摘 要： | 本研究通过磨损试验台研究了铧面角与刃口磨损形式之间的关系，试验结果表明：适当降低硬度，增大铧面角可以减小背棱宽度和刃口圆弧半径，这些是单金属犁铧形成自磨刃的必要条件。
|
| 关 键 词： | 犁铧 自磨刃 形成机理 铧面角 刃口磨损规律 |
Experimental Study on Abrasion Course of Plowshare Edge |
| |
| Kang Yinxia,Wang Ping,Cao Lubo\,.Experimental Study on Abrasion Course of Plowshare Edge[J].Journal of Xinjiang Agricultural University,2000,23(1):62-64. |
| |
| Authors: | Kang Yinxia Wang Ping Cao Lubo\ |
| |
| Institution: | College of Mechanical and Traffic Engineering |
| |
| Abstract: | Relationship between angle of plowshare and abrasion modality of plowshare edge was studied by means of test bed experiment in the paper. Results of the experiment show that reducing hardness of the material and augmenting the angle of plowshare properly can reduce back strip width and arc radius of the edge. And it is necessary condition for forming self sharpening edge of single metal plowshare. |
| |
| Keywords: | plowshare abrasion self sharpening edge |
| 本文献已被 CNKI 维普 等数据库收录！ |
